Activity

3Dynamics @stonecld please send me a private message to discuss the further scaling details there.

3Dynamics @stonecld Not yet, I'll get back to you soon!

3Dynamics @stonecld send me the measurements and I'll see what I can do :)

3Dynamics @hyukis1835 Hi Hiroyuki, the dimensions are 5.6mm x 5.2mm same as the stock ones that come with the kit.

3Dynamics @stonecld The part you requestd is available in the MPC section of my shop now :)

3Dynamics @stonecld I can try, I only hope that after scaling it down, some parts are not too small for printing them in strong and flexible plastic. I'll get back to you soon!

3Dynamics @fbf0307 Sorry, this is not possible.

3Dynamics @Sascha1900 Hi Sascha, thank you for your compliment. I'm not sure the platform will fit as I moved the pits from the original position in order to be screen accurate. I will provide one that fits too. It's still in early development phase but it will be available eventually :) Please keep an eye on my shop or my Facebook group: https://www.facebook.com/groups/667214673428020/

3Dynamics @fba6ee2 yes it does have all 4 mount locations. This video shows exactly what you're asking: https://youtu.be/0fXdkfEn844 As you mentioned, the support platform needs cutting to accommodate the pits, I'm planning to design a modified support platform to accommodate them.

3Dynamics @fba6ee2 Thank you for your kind words! About the extended cargo hold, it fits the Falcon but you'll have to sand down the upper turret so that it doesn't touch the tech station back wall.

3Dynamics @fba6ee2 Yes you can and thank you for your support!

3Dynamics @fba6ee2 yes, I can confirm that the parts fit together well. I just need to find the time to put together the assembly instructions and make some pictures of the completed hold. I'm moving to a new house just before Christmas and I'm very busy until then. Soon after that I'll publish the instructions and pictures. So please bear with me until then. You will not be disappointed. Thanks for your understanding.

3Dynamics @Mynkus You should better order the part called DeAgo Millennium Falcon Floor Extended alt version, link: http://shpws.me/MvqD The compatible kits designed by Dragnse7en are listed in the product description.

3Dynamics @Kennywood thanks for your support!

3Dynamics @Kennywood I just got issue 89 and 92 last week and I'm working on it. The floor itself fits without a problem. There's a change needed to the tech station back wall in order to make it fit against the turret. Stay tuned, as soon as I have more news I will take it out of beta. On this picture you can see that the extended floor fits perfectly the stock set up. It also fits the floor support from issue 89 perfectly, take a look at this short video I made: https://youtu.be/0fXdkfEn844

3Dynamics @Spyky44 Dans le photos il s'agit de materiel "white strong and flexible POLISHED" tout a fait, un materiel qui est moins granuleux que le materiel "white strong and flexible" (qui n'est pas du tout poli), mais il est quand meme un tout petit peu granuleux. Si tu veux pas que ce soit granuleux du tout, tu dois choisir le materiel "Frosted Ultra Detail".

3Dynamics @fb41085 The stock pipes are not screen accurate, they should be almost twice the diameter. Yes, you could use the stock pipes but I'm affraid it wouldn't look right. So if your goals is to make a screen accurate cargo hold I kindly advice to make your own pipes or to purchase the version with pipes, that you can find here: http://shpws.me/Mkg1

3Dynamics @htut thanks, I'm happy to here you like it. It was made out of love for this model. That applies for all upgrades for the Millennium Falcon by the way.

3Dynamics @bryantwaller I'm using the stock turrets as you can see on my previous picture. It should work with the Paragrafix turrets too I think but I don't have these to test it. Also the Shapeways turrets wells should work fine.

3Dynamics @bryantwaller Dragnse7en just made an adjustment / cut off on the back of the piece to make it work with the turrets. I just uploaded the updated version and I want to do a test print before I take it out of beta to be sure it fits without a problem. The turret could need some sanding though, I will know for sure when I get the printed piece. As soon as I'm finished testing, I will let you know and I'll take it out of beta. So stay tuned...