opresco is selling 18 products in Dice section
by
opresco
Free ball inside!
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
by
opresco
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
• I made this exclusively, from scratch, for a very smart guy who, for posterity, quietly collects all my die designs; I wish he'll make a good fortune out of them, long before I dice :-)
• Has "OPRESCO FECIT FOR COOK - A.D. 2010" inscription on one of the inside faces. I hope he's rich enough so he could afford ordering 2 sets and UPS me one, with his autograph on it :-) And Kevin, if you do, please mention on your order (in bold lettering) that the captive RHOMBIDIE® should be free to move around at will, inside! :-)
• Note: In the 1980's, I've been exploring the duality of Polyhedra while making a series of polyhedral sculptures; I've developed, then, an unique method/theory/theorem on building Platonic and Archimedean Polyhedra out of scrap metal offset plates (to this day, my favorite material for building all kind of models by hand) and machine screws by strictly using only conventional (at the time) drafting tools: (T-square, Triangles, Compass, Protractor, Trigonometer) and an E-Xacto knife. All geometric art seen in my shop is the spin-off of that hands-on research and work; for more info see http://cascador.com/RegularPolyhedra/PolyhedraH
• Keep an eye for the soon to be released 30 faceted RHOMBICTRIACONTAHEDIE® with Roman numerals on it :-)
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
• I made this exclusively, from scratch, for a very smart guy who, for posterity, quietly collects all my die designs; I wish he'll make a good fortune out of them, long before I dice :-)
• Has "OPRESCO FECIT FOR COOK - A.D. 2010" inscription on one of the inside faces. I hope he's rich enough so he could afford ordering 2 sets and UPS me one, with his autograph on it :-) And Kevin, if you do, please mention on your order (in bold lettering) that the captive RHOMBIDIE® should be free to move around at will, inside! :-)
• Note: In the 1980's, I've been exploring the duality of Polyhedra while making a series of polyhedral sculptures; I've developed, then, an unique method/theory/theorem on building Platonic and Archimedean Polyhedra out of scrap metal offset plates (to this day, my favorite material for building all kind of models by hand) and machine screws by strictly using only conventional (at the time) drafting tools: (T-square, Triangles, Compass, Protractor, Trigonometer) and an E-Xacto knife. All geometric art seen in my shop is the spin-off of that hands-on research and work; for more info see http://cascador.com/RegularPolyhedra/PolyhedraH
• Keep an eye for the soon to be released 30 faceted RHOMBICTRIACONTAHEDIE® with Roman numerals on it :-)
by
opresco
• 20 faceted dice (based on the icosahedron) • Could be worn as a pendant • Lanyard not included.•
Uses the same original construction algorithm as the popular DODCLOCK DIE and the 32-BIT SOCCER BALL DIE
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
Uses the same original construction algorithm as the popular DODCLOCK DIE and the 32-BIT SOCCER BALL DIE
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
by
opresco
• 12 faceted die based on the Rhombic Dodecahedron.
• Related designs:
Rhombic die
Keyring with Rhombic Die
Rhombic Die Ring
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
• Related designs:
Rhombic die
Keyring with Rhombic Die
Rhombic Die Ring
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
by
opresco
• 32 faceted die • Design based upon the geometry of the Truncated Icosahedron, a.k.a. the Soccer Ball • Hexagonal faces numbered 1 to 20; Pentagonal faces numbered 21 to 32 • Uses the same original construction algorithm as the popular ICODIE and the Dodclock Die • A related design that can be worn as a Pendant
*******************
See other Soccer Ball (A.K.A. Truncated Icosidodecahedron) related designs here:
Soccer Ball Ring
Soccer Ball Earrings
Soccer Ball with Roosevelt Island Tram inside
Soccer Ball Pendant
Soccer Ball with American Football Inside #1
Soccer Ball with American Football Inside #2
Soccer Ball Pendant /Keyring
Dutch Shoe Inside Soccer Ball #1
Soccer Ball with Dutch Soccer Shoe Inside
Peace Ball
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
*******************
See other Soccer Ball (A.K.A. Truncated Icosidodecahedron) related designs here:
Soccer Ball Ring
Soccer Ball Earrings
Soccer Ball with Roosevelt Island Tram inside
Soccer Ball Pendant
Soccer Ball with American Football Inside #1
Soccer Ball with American Football Inside #2
Soccer Ball Pendant /Keyring
Dutch Shoe Inside Soccer Ball #1
Soccer Ball with Dutch Soccer Shoe Inside
Peace Ball
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
by
opresco
• 12 faceted die (based on the dodecahedron) • Could be worn as a pendant • Lanyard not included
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
by
opresco
Could be worn as a pendant (lanyard not included)
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
by
opresco
• 60-sided die with faces numbered from 1 to 60.
• This design is based upon the geometry of the Pentagonal Hexecontahedron
• A variation of this design could be seen here: http://www.shapeways.com/model/148752/the_rosetta_dice__1__60_.html
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
• Note: The unique construction method that I have used in assembling (piece by piece) this model is based upon a Theorem on the Duality of Regular Polyhedra that I have demonstrated in 1981– while creating and building, by hand, a series of polyhedral sculptures. For more info, see:
http://www.cascador.com/RegularPolyhedra/PolyhedraH.htm
http://www.cascador.com/RegularPolyhedra/PolyhedralSculptures/PolyhedraSculptures1.html
http://www.cascador.com/RegularPolyhedra/PolyLamps/PolyLamps1.html
http://www.cascador.com/RegularPolyhedra/sampleimages.htm
• This design is based upon the geometry of the Pentagonal Hexecontahedron
• A variation of this design could be seen here: http://www.shapeways.com/model/148752/the_rosetta_dice__1__60_.html
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
• Note: The unique construction method that I have used in assembling (piece by piece) this model is based upon a Theorem on the Duality of Regular Polyhedra that I have demonstrated in 1981– while creating and building, by hand, a series of polyhedral sculptures. For more info, see:
http://www.cascador.com/RegularPolyhedra/PolyhedraH.htm
http://www.cascador.com/RegularPolyhedra/PolyhedralSculptures/PolyhedraSculptures1.html
http://www.cascador.com/RegularPolyhedra/PolyLamps/PolyLamps1.html
http://www.cascador.com/RegularPolyhedra/sampleimages.htm
by
opresco
• Based upon the geometry of the RHOMBICTRIACONTAHEDRON
• 30 faces numbered 1-30; the sum of oposing faces = 31
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
• 30 faces numbered 1-30; the sum of oposing faces = 31
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
by
opresco
The die's faces are supported by springs meeting in its center.
Printed and tested OK.
Copyright ©2011 Ovidiu Opresco
Printed and tested OK.
Copyright ©2011 Ovidiu Opresco
by
opresco
The die's faces are supported by springs meeting in its center.
Printed and tested OK
Copyright ©2011 Ovidiu Opresco
Based upon the geometry of the Rhombic Triacontahedron
Printed and tested OK
Copyright ©2011 Ovidiu Opresco
Based upon the geometry of the Rhombic Triacontahedron
by
opresco
• 12 faceted die based on the Rhombic Dodecahedron.
• Related designs:
Rhombic die (2.5 cm)
Keyring with Rhombic Die
Rhombic Die Ring
• Related designs:
Rhombic die (2.5 cm)
Keyring with Rhombic Die
Rhombic Die Ring
by
opresco
• Related designs:
Rhombic die
Rhombic die (2.5 cm)
Keyring with Rhombic Die
See my New Spring-Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
***************************************
• Click on PERSONALIZE to order your size.
Available ring sizes:
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Rhombic die
Rhombic die (2.5 cm)
Keyring with Rhombic Die
See my New Spring-Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
***************************************
• Click on PERSONALIZE to order your size.
Available ring sizes:
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
by
opresco
Dedicated to Stijn van der Linden.
----------------------------------------------------------------------------------------------------
"Alea Iacta Est" :-)
For the Dice, Colored Pencils, Markers, Fine Arts Brushes,
Chopsticks, Crayolas — Aficionados, and/or, Collectors Everywhere :-)
The captive intertwined dice could be rotated in the Z axis in any po-
sition relative to each other — while one of the twins appears to float
8 mm above your desk :-)
----------------------------------------------------------------------------------------------------
Organize your pencils, pens, brushes, chopsticks; long ones,
in the Z axis; shorter ones, in the X & Y axis :-) ----------------------------------------------------------------------------------------------------
This design (with 13 mm square holes) is a variation of
Steel Grid Dice (3 cm) which is my first ever design (2010)
for 3d Printing in Plastics & Stainless Steel at Shapeways.
This design (with 13 mm square holes) is a variation of
Steel Grid Dice (3 cm) which is my first ever design (2010)
for 3d Printing in Plastics & Stainless Steel at Shapeways.
----------------------------------------------------------------------------------------------------
RELATED DESIGNS:
"Siamese Twins" – Pencil Organizer Dice #2
Pencil Organizer Dice
A (Durer Alphabet) – Pencil Holder
My new Spring Loaded Dice:
Spring-loaded die.
Spring-loaded Icodie.
Spring-loaded 30-sided die.
My other Dice designs:
Dodclock Die (3 cm)
Icodie (3 cm) v.4
Secret Roundie (2.5 cm)
The Rosetta Dice #1 (60)
The Rosetta Dice #2 (60)
Rhombic die (2.5 cm)
Die 30
Rhombic Die #2
32-bit Soccer Ball Die
Kevin's Dice Contraption
Steel Grid Die (2.5 cm)
Exploded Die (Loaded :)
Steel Cage Die #1
Exploded Die (Clean:)
Roundie (2cm)
Roundie (2.5cm)
Steel Grid Die #2 (2.5 cm)
Steel Grid Die #3 (2.5 cm)
----------------------------------------------------------------------------------------------------
“The only way to discover the limits of the possible
is to go beyond them into the impossible.”
Arthur C. Clarke
----------------------------------------------------------------------------------------------------
"Alea Iacta Est" :-)
For the Dice, Colored Pencils, Markers, Fine Arts Brushes,
Chopsticks, Crayolas — Aficionados, and/or, Collectors Everywhere :-)
The captive intertwined dice could be rotated in the Z axis in any po-
sition relative to each other — while one of the twins appears to float
8 mm above your desk :-)
----------------------------------------------------------------------------------------------------
Organize your pencils, pens, brushes, chopsticks; long ones,
in the Z axis; shorter ones, in the X & Y axis :-) ----------------------------------------------------------------------------------------------------
This design (with 13 mm square holes) is a variation of
Steel Grid Dice (3 cm) which is my first ever design (2010)
for 3d Printing in Plastics & Stainless Steel at Shapeways.
This design (with 13 mm square holes) is a variation of
Steel Grid Dice (3 cm) which is my first ever design (2010)
for 3d Printing in Plastics & Stainless Steel at Shapeways.
----------------------------------------------------------------------------------------------------
RELATED DESIGNS:
"Siamese Twins" – Pencil Organizer Dice #2
Pencil Organizer Dice
A (Durer Alphabet) – Pencil Holder
My new Spring Loaded Dice:
Spring-loaded die.
Spring-loaded Icodie.
Spring-loaded 30-sided die.
My other Dice designs:
Dodclock Die (3 cm)
Icodie (3 cm) v.4
Secret Roundie (2.5 cm)
The Rosetta Dice #1 (60)
The Rosetta Dice #2 (60)
Rhombic die (2.5 cm)
Die 30
Rhombic Die #2
32-bit Soccer Ball Die
Kevin's Dice Contraption
Steel Grid Die (2.5 cm)
Exploded Die (Loaded :)
Steel Cage Die #1
Exploded Die (Clean:)
Roundie (2cm)
Roundie (2.5cm)
Steel Grid Die #2 (2.5 cm)
Steel Grid Die #3 (2.5 cm)
----------------------------------------------------------------------------------------------------
“The only way to discover the limits of the possible
is to go beyond them into the impossible.”
Arthur C. Clarke
