Ariel's Customs
Designs by fakebusker83
fakebusker83 is selling 89 products in Weapon accessories section
by
fakebusker83
Version 1.0
This is a small set of components to form 2 'dreadacles' of 27 units each. In total this set contains:
- 2 x 3mm peg unit
- 2 x 3mm port unit
- 50 x basic dreadacle units
- 1 x cyber-kunai
- 1 x gripper claw
The main dreadacle segment attaches together via balljoints, and the cyber-kunai and gripper claw pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
The gripper claw works on all 3mm diameter pegs.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
This is a small set of components to form 2 'dreadacles' of 27 units each. In total this set contains:
- 2 x 3mm peg unit
- 2 x 3mm port unit
- 50 x basic dreadacle units
- 1 x cyber-kunai
- 1 x gripper claw
The main dreadacle segment attaches together via balljoints, and the cyber-kunai and gripper claw pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
The gripper claw works on all 3mm diameter pegs.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
by
fakebusker83
Version 1.6
This is a pair of KaBlammer accessories compatible with the Thugmeister and Dejector designs. Each one is held by a 3mm peg handle, and all four 'prongs' at the lower end are posable.
Some assembly is required.
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Radicon thread here.
Flickr gallery here.
This is a pair of KaBlammer accessories compatible with the Thugmeister and Dejector designs. Each one is held by a 3mm peg handle, and all four 'prongs' at the lower end are posable.
Some assembly is required.
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.0
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
by
fakebusker83
Version 1.0
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
by
fakebusker83
A pair of wrists, hands and add-on accessories for the ROTF voyager Starscream figure! Every finger is posable on ball joints, and the wrists are double-jointed for maximum posability!
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
by
fakebusker83
Version 1.0
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
by
fakebusker83
Version 1.5
This is a set of weapons designed to be used with Dark of the Moon voyager Sentinel Prime figure! Each set includes a pair of swords, a hand blaster and a shield. The swords and blaster can be stored at the back of the shield, which in turn can be stored at the back of the figure or on top of its alt mode!
All the weapons and shield are held by 5mm pegs, so they are compatible with many other figures.
This set is tested on White Strong Flexible.
This is a set of weapons designed to be used with Dark of the Moon voyager Sentinel Prime figure! Each set includes a pair of swords, a hand blaster and a shield. The swords and blaster can be stored at the back of the shield, which in turn can be stored at the back of the figure or on top of its alt mode!
All the weapons and shield are held by 5mm pegs, so they are compatible with many other figures.
This set is tested on White Strong Flexible.
by
fakebusker83
Version 1.5
This blaster is an enlarged version of the one included in the voyager Sentinel Prime weapon set, this time sized to fit the leader class Sentinel Prime figure!
Includes a 3mm c-clip to allow storage on Sentinel's many 3mm railings.
This model is untested.
Includes a 3mm c-clip to allow storage on Sentinel's many 3mm railings.
This model is untested.
by
fakebusker83
Version 1.5
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.
A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.
A larger version can be found here.
This model is tested in WSF.
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.
A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.
A larger version can be found here.
This model is tested in WSF.
by
fakebusker83
Version 1.5
Edit: Tightened hand peg, similar to original version.
An enlarged version of the "Feuer Frei" scatter blaster, now lengthened to 13 cm to better fit leader class figures. The handle is still a 5mm compatible peg.
There are still 2 auxiliary pegs on the side for storage, as well as areas where 3mm c-clips can attach to.
This model is untested.
Edit: Tightened hand peg, similar to original version.
An enlarged version of the "Feuer Frei" scatter blaster, now lengthened to 13 cm to better fit leader class figures. The handle is still a 5mm compatible peg.
There are still 2 auxiliary pegs on the side for storage, as well as areas where 3mm c-clips can attach to.
This model is untested.
by
fakebusker83
Version 1.5
Edit: Thickened front spikes for greater endurance and strength.
A vicious, spiky hand cannon to arm your alien robotic ground troops with! Made to be as accurate to the movie footage as possible, this design contains hoses, armour plates and other features that cannot be easily replicated with conventional molding techniques.
Printing in Strong Flexible is recommended due to the amount of fine, fragile details.
This model is tested in WSF.
Edit: Thickened front spikes for greater endurance and strength.
A vicious, spiky hand cannon to arm your alien robotic ground troops with! Made to be as accurate to the movie footage as possible, this design contains hoses, armour plates and other features that cannot be easily replicated with conventional molding techniques.
Printing in Strong Flexible is recommended due to the amount of fine, fragile details.
This model is tested in WSF.
by
fakebusker83
A attachment set with a jackhammer, grabbing claw and wrecking ball attachment for the Reveal the Shield Solar Storm Grappel figure.
This model is untested.
This model is untested.
by
fakebusker83
Version 1.5
A pair of claw weapons for the HFTD Tomahawk figure! This design is inspired by the appearance of the Wrecker Whirl in the IDW comics, and are meant to emulate his 4 fingered claw design.
Each finger-claw has 2 ball joints and are mounted on a wrist section which can rotate 360d as well.
Because of the fist-sheath that is supposed to hide the original hands of the figure, these claws are not suitable for all figures. As a rough guideline, the width of the figure's forearm should be equal to or narrower than 12mm. Also, the figure should be able to hold a 5mm peg handle.
A pair of claw weapons for the HFTD Tomahawk figure! This design is inspired by the appearance of the Wrecker Whirl in the IDW comics, and are meant to emulate his 4 fingered claw design.
Each finger-claw has 2 ball joints and are mounted on a wrist section which can rotate 360d as well.
Because of the fist-sheath that is supposed to hide the original hands of the figure, these claws are not suitable for all figures. As a rough guideline, the width of the figure's forearm should be equal to or narrower than 12mm. Also, the figure should be able to hold a 5mm peg handle.
by
fakebusker83
Version 1.0
A pair of Sickles favoured for use by the D.R.E.A.D team. Each Sickle has a vertical and horizontal 5mm peg for different mounting methods, and measures 73 mm from handle to blade.
This model is successfully tested in White Strong Flexible.
A pair of Sickles favoured for use by the D.R.E.A.D team. Each Sickle has a vertical and horizontal 5mm peg for different mounting methods, and measures 73 mm from handle to blade.
This model is successfully tested in White Strong Flexible.
by
fakebusker83
Version 1.0
This is a Spiker blaster favoured for use by the D.R.E.A.D team. It is held by a 5mm peg handle. This model has been successfully tested in White, Strong Flexible.
This is a Spiker blaster favoured for use by the D.R.E.A.D team. It is held by a 5mm peg handle. This model has been successfully tested in White, Strong Flexible.
by
fakebusker83
Version 1.0
This is a pair of Slicer accessories favoured for use by the D.R.E.A.D team. Each Slicer has one fixed and one movable handle peg for multiple ways of holding, and the front claw assembly has 4 ball joints for maximum posability.
This model has been successfully tested in White, Strong Flexible.
This is a pair of Slicer accessories favoured for use by the D.R.E.A.D team. Each Slicer has one fixed and one movable handle peg for multiple ways of holding, and the front claw assembly has 4 ball joints for maximum posability.
This model has been successfully tested in White, Strong Flexible.
by
fakebusker83
Version 1.0
A pair of Suppressor minigun accessories favoured for use by the D.R.E.A.D team! Each Suppressor is highly detailed and comes with a 360º swivel arm that allows it to act as a personnel mounted turret! The swivel attaches to any compatible 5mm port.
Each Suppressor comes in 3 components including the barrel assembly, main casing and swivel arm. Some assembly is required.
This model is successfully tested in White Strong Flexible and that material is recommended. For those who want only one Suppressor, you can get the left one here and the right one here.
A pair of Suppressor minigun accessories favoured for use by the D.R.E.A.D team! Each Suppressor is highly detailed and comes with a 360º swivel arm that allows it to act as a personnel mounted turret! The swivel attaches to any compatible 5mm port.
Each Suppressor comes in 3 components including the barrel assembly, main casing and swivel arm. Some assembly is required.
This model is successfully tested in White Strong Flexible and that material is recommended. For those who want only one Suppressor, you can get the left one here and the right one here.
by
fakebusker83
Version 1.0
This is a set of components to form 6 'dreadacles' of 30 units each. In total this set contains:
- 6 x 3mm peg unit
- 6 x 3mm port unit
- 168 x basic dreadacle units
- 6 x cyber-kunai
The main dreadacle segment attaches together via balljoints, and the cyber-kunai pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
Equally distributed, the length of each dreadacle is about 16 cm.
For their intended usage, it is recommended to get the D.R.E.A.D 6X3 Backpack model as well.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
This is a set of components to form 6 'dreadacles' of 30 units each. In total this set contains:
- 6 x 3mm peg unit
- 6 x 3mm port unit
- 168 x basic dreadacle units
- 6 x cyber-kunai
The main dreadacle segment attaches together via balljoints, and the cyber-kunai pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
Equally distributed, the length of each dreadacle is about 16 cm.
For their intended usage, it is recommended to get the D.R.E.A.D 6X3 Backpack model as well.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
by
fakebusker83
This is the booster pack for the D.R.E.A.D 6 X Dreadacles set, containing 120 basic dreadacle units. This can add up to 57 cm in length to your dreadacles.
This model has been successfully tested in Strong Flexible.
This model has been successfully tested in Strong Flexible.
by
fakebusker83
Version 1.6
A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.
Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.
Printing in Detail material is recommended.
A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.
Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.
Printing in Detail material is recommended.
by
fakebusker83
Version 2.0
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
by
fakebusker83
Version 2.0
A pair of show accurate blasters for TF: Prime RID deluxe Arcee! These blasters are held by 5mm pegs, and they also have side peg holes for them to be mounted on the side of her bike mode!
This set is for those who have already owned the previously released "Spider Stinger" blades, and wanted just the blasters.
Version 1.0 is tested in White Strong Flexible. The current version 2.0 is untested.
Buyer beware.
A pair of show accurate blasters for TF: Prime RID deluxe Arcee! These blasters are held by 5mm pegs, and they also have side peg holes for them to be mounted on the side of her bike mode!
This set is for those who have already owned the previously released "Spider Stinger" blades, and wanted just the blasters.
Version 1.0 is tested in White Strong Flexible. The current version 2.0 is untested.
Buyer beware.
by
fakebusker83
A fusion cannon and blade replacement for the TF: Prime Powerizer Megatron figure! This set includes a fusion cannon and an forearm armour attachment with a fold-out blade.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
by
fakebusker83
Version 1.6: Fixed thin wall issue on missile fins.
This is a set to upgrade the Transformers Prime deluxe (FE) Starscream figure! It contains a blaster, 2 triple missile launchers, 2 single missile launchers, 2 knee spikes, and 1 head spike.
You can find installation instructions at my TFW2005.com thread.
This is a set to upgrade the Transformers Prime deluxe (FE) Starscream figure! It contains a blaster, 2 triple missile launchers, 2 single missile launchers, 2 knee spikes, and 1 head spike.
You can find installation instructions at my TFW2005.com thread.
by
fakebusker83
Version 2.0
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
Of course, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
Of course, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
Version 2.0
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
Version 2.0
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
by
fakebusker83
Version 3.0
Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.
This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.
TFW2005 thread here.
Flickr gallery here.
Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.
This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.
TFW2005 thread here.
Flickr gallery here.
by
fakebusker83
Version 1.5
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
by
fakebusker83
Version 1.5
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
by
fakebusker83
Version 1.0
A show accurate sword for TF: Prime Powerizer Dreadwing! This sword measures 128 mm in length and features a 5mm peg compatible handle.
This model has not been tested.
A show accurate sword for TF: Prime Powerizer Dreadwing! This sword measures 128 mm in length and features a 5mm peg compatible handle.
This model has not been tested.
by
fakebusker83
Version 1.5
This massive accessory measures 163 high, 112mm wide and 40mm in diameter for each hammer head. Some assembly is required.
The 5mm diameter handle can be used with most compatible hands.
The Etnarium has been successfully tested in White Strong Flexible.
This massive accessory measures 163 high, 112mm wide and 40mm in diameter for each hammer head. Some assembly is required.
The 5mm diameter handle can be used with most compatible hands.
The Etnarium has been successfully tested in White Strong Flexible.
by
fakebusker83
Version 2.0: Handle is shaped to a straight cylinder for better grip.
This is the hilt section of the Deicidium blade, consisting of the handle piece and pommel attachment. Includes an auxiliary peg on the side for storage.
The handle is 5mm peg compatible.
Printing in Black Strong Flexible is recommended.
Click here for Part B (136mm long blade).
Click here for Part B (110mm long blade).
Version 2.0 is tested in Black Strong Flexible and Frosted Ultra Detail.
You might also be interested in getting the Desecrated Vambrace.
This is the hilt section of the Deicidium blade, consisting of the handle piece and pommel attachment. Includes an auxiliary peg on the side for storage.
The handle is 5mm peg compatible.
Printing in Black Strong Flexible is recommended.
Click here for Part B (136mm long blade).
Click here for Part B (110mm long blade).
Version 2.0 is tested in Black Strong Flexible and Frosted Ultra Detail.
You might also be interested in getting the Desecrated Vambrace.
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
- Artist
Shop Sections
