You must be logged in and verified to contact the designer.
Product Description
Ever wanted to connect a PET softdrink bottle to standard plumbing fittings ?? This cap screws onto a PET softdrink bottle and has a 20 mm (3/4 inch) male BSP taper (ISO 7) thread. NOTE: a 118 "O" ring is required to get a good seal to the bottle top.
To assemble - clean any dust out of the O ring groove using a wooden matchstick or similar. BEFORE fitting the O ring - pack some grease or petroleum jelly (Vaseline) into the groove - spreading it evenly as much as you can. Press the O ring in using a matchstick and clean out any grease / petroleum jelly that got squeezed out. The plumbing thread can be sealed with thread tape or a liquid / paste thread sealer.
PLEASE NOTE: Pressurising / pumping up soft drink bottles can be very dangerous !! It is however great fun and I used this to make my kids a mortar that fires a tennis ball 60 metres when the bottle is pumped up to 80 PSI.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: