You must be logged in and verified to contact the designer.
Product Description
modeled after a 530 motorcycle chain.
the small washer/o-rings need o be filed/sanded down to about half their current thickness in order for everything to line up right. I sanded mine down to about .5mm and everything glued up just fine.
ETA: So I finally got around to assembling the links that I ordered. I didn’t use the “washers” and in its present state, there aren’t enough pins to use all of the links. Should have been two pins per set. Working on a new model that will be cheaper and have all the parts needed to make a chain the length you want it to be.
Some assembly is required. I used loctite GO2 GLUE to assemble the parts. I have not tried any CA or superglues on this material yet.
I'm going to use a small length of this to hang from my rear view mirror in my car for some decoration and reminder of my motorcycle at home.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: