Product Description
This is an N-scale interior set, which is designed to augment DPM Otto's Parts (kit # 503). This interior represents a bank, with an L-shaped teller row, with five windows, three officers desks, and a vault. This kit also has a wall segment, which is intended to add a drive-up window. Using the side wall from the kit, the one with the four windows, after you've cleaned the part, but before you've sanded the edges square, measure up from the bottom of the kit wall, a scale 12 feet, or 0,90 inches in real world measurement. Using epoxy or CA glue, attach the drive-up window wall segment from this set, to the upper portion of the wall you just modified from the DPM kit. I recommend using square styrene stock to reinforce the joined wall. There are guides on the replacement wall, and the right front corner of the vault, which you can use to add a 10-foot (0.75-inch) tall rear interior wall, using 0.030 styrene. I also included a placque, which can be glued to the front of the building facade, to represent a bank, once common to Oregon.