Gray PA12
*c96 hammer (x1) MODIFIED Denix
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$15.55
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is designed for a Denix that has been modified and Accurized!
Real live fire c96 mausers were used for the Hero (ANH), Dagobah - resin casting made from that Hero, Bespin (ESB) and Stembridge (ROTJ). So in order to recreate this film props as accurately as possible I created these parts from an actual c96’s hammer. They are extremely detailed and very accurate in its reproduction.
Click these links to see how these c96 hammers improve the overall look of a Denix = Pic 1 Pic 2 <Close ups> Pic 3 Pic 4 / Hero (ANH) / Dagobah / Bespin (Han & Luke) / Stembridge
This material “Multi Jet Fusion” is very strong.. the denix will break before these prints will. You can sub them directly onto the denix without any lapse in use. As a wise man once said “Trust me”. There should be no concern about its strength. I’ve tested them for a few months before making them available to be sure.
*This design was created to fit a denix after the top has been slid forward. By sliding the top forward it alines perfectly with a real c96 mauser and becomes a more accurate recreation of the film prop itself. Message me about the mods needed if desired and I would be more than happy to help. Best place to communicate with me is my Instagram page.. @dl44blaster
Real live fire c96 mausers were used for the Hero (ANH), Dagobah - resin casting made from that Hero, Bespin (ESB) and Stembridge (ROTJ). So in order to recreate this film props as accurately as possible I created these parts from an actual c96’s hammer. They are extremely detailed and very accurate in its reproduction.
Click these links to see how these c96 hammers improve the overall look of a Denix = Pic 1 Pic 2 <Close ups> Pic 3 Pic 4 / Hero (ANH) / Dagobah / Bespin (Han & Luke) / Stembridge
This material “Multi Jet Fusion” is very strong.. the denix will break before these prints will. You can sub them directly onto the denix without any lapse in use. As a wise man once said “Trust me”. There should be no concern about its strength. I’ve tested them for a few months before making them available to be sure.
*This design was created to fit a denix after the top has been slid forward. By sliding the top forward it alines perfectly with a real c96 mauser and becomes a more accurate recreation of the film prop itself. Message me about the mods needed if desired and I would be more than happy to help. Best place to communicate with me is my Instagram page.. @dl44blaster
Details
What's in the box:
C96 mod dnx “3200-4A“ 6-26-20 step
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$7.08
$7.96
$7.07
