Click and drag to rotate
Traumboot 1:160 (N scale) drive/ohne Detailset 3d printed

DIGITAL PREVIEW
Not a Photo

Gray PA12
Traumboot 1:160 (N scale) drive/ohne Detailset 3d printed
Traumboot 1:160 (N scale) drive/ohne Detailset 3d printed

DIGITAL PREVIEW
Not a Photo

Traumboot 1:160 (N scale) drive/ohne Detailset

Print With Shapeways
Choose Your Material
$82.41
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
DEUTSCH
Ungeeignet für Anfänger!
Bausatz "Traumboot" für 1:160 - unbemalt und ohne Deko
ZUSÄTZLICH WIRD BENÖTIGT:
Detailset Traumboot
- passend für Minimotoren kurz mit Mikrogetriebe  
N20 DC Getriebe Motor 7 U/Min - 3 V
- Nicht geeignet für Motoren mit kurzen Wellen.
- Motor wird festgeschraubt (M1,6x3)
- Ich garantiere nicht, dass eine Verklebung des Motors funktioniert.
- Es könnte sein, dass die Löcher für den Motor geweitet werden müssen. Ich mache das mit einem 4mm Bohrer per Hand und mit einer Pinzette
- der Arm mit Gondel  ist Presspassung und ist etwas schwierig daufzudrücken. Eventuell mit etwas innen Schmirgelpapier vorsichtig glätten.
- Deko kann aus rechtlichen Gründen nicht gestellt werden
- Um das Getriebe zu entlasten haben ich ein 4g Kontergewicht am gegenüberliegenden Arm zur Gondel angeklebt.

English
- not suitable for modelstarter
Kit "Traumboot"  for 1:160  - unpanited and without decals
YOU WILL NEED EXTRA:
Detailset Traumboot
- fits the minimotor short with microdrive 
N20 DC Getriebe Motor 7 rpm - 3 V
- not suitable for motors with short shaft.
- motor has to be screwed on (M1,6x3)
- I do not guarantee that an adhesive bond works.
- It could be that the holes, where the motor is mounted on are not wide enough. For the center i use a 4 mm drill per hand and an old tweezer for the others.
- the arm with gondola is pressfit and might be slightly tricky to put on. If necessary smooth out carefully a bit with some sandpaper inside.
- due to legal reasons i cannot provide any decoration
- to relieve the gearbox i glued a 4g sounterweight to th eopposite arm of the gondola.

MOTOR UND SCHRAUBEN NICHT ENTHALTEN - MOTOR AND SCREWS ARE NOT INCLUDED

Irrtum vorgehalten - errors expected

ACHTUNG.
Die Designs in diesem Shop sind zum Zweck des Modellbaues oder sammelns bestimmt. Sie können verschluckbare Kleinteile enthalten die für Kleinkinder  0-3 JAhre ein Erstickungsrisiko darstellen können oder müssen mit einem Messer auseinandergeschnitten werden. Es ist kein Spielzeug! Sie sollten grundsätzlich nur von Personen über 14 Jahren oder unter Aufsicht eines Erwachsenen verwendet werden.
ATTENTION.
The designs in this shop are designed for modeling purposes or collecting only. It is not a toy. They may contain small parts which can be swallowed which can be a chocking hazzard for children 0-3 years or have to be seperated with a knife.
They should only be used by persons over 14 years of age or under supervision of an adult.

 
Details
What's in the box:
Traumboot ohne Wanten 160
Dimensions:
8.5 x 14.59 x 11.51 cm
Switch to inches
3.35 x 5.74 x 4.53 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.