009 'Medium George England' FR Style
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$50.04
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Freelance George England 0-4-0T+T Locomotive - Festiniog Railway Style
This model is a freelance design taking inspiration from various features of the locomotives built for the Festiniog Railway by George England. Ideal if you like the look of the England locos, but are not modelling the Festiniog Railway.
This model features sandpots, chimney and smoke box door that were fitted by the FR.
Designed to suit Bachmann N gauge Percy chassis.
Requires:
Bachmann N gauge Percy chassis
Ø0.31 brass wire
Alan Gibson 4mm Short handrail knobs G4M53 or equivilant.
Ø6.2, 9mm gauge wheels for the tender. Graham Farish and Dundas Models wheels fit this model.
Assembly advice:
Preparing the chassis:
Remove body from the Bachmann Percy by undoing the four screws under the cab and cylinders.
Undo the 3 screws to remove the chassis keeper plate. Take out the existing N gauge couplings.
Cut the sprue between the firebox and front buffer part and trim or file back to the flat surfaces.
Fit the firebox into the rear coupling pocket and the front buffer into the front coupling pocket, checking they are the correct way up. Reattach the keeper plate with the 3 screws.
Adding brass wire:
Add Ø0.31 brass wire through the handrail knobs. No drilling is needed for the knobs and is not recommended as it could break them. Take your time with this step. I threaded a full length of wire through the knobs, marked the end gently with a knife, then removed the wire before trimming to length and re-installing.
Bass wire is also used for:
Whistle chords.
The whistles can be replaced with brass ones if desired by removing the plastic ones and drilling out the holes marked inside the saddle tank.
Handrail knobs are required for the front of the smokebox and sides of the tank.
Fitting the body:
Attach the body with the two rear screws. Due to the way the Percy is designed, the front screws cannot be used as printed material isn't strong enough to replicate the spigot. You could cut the spigots off the print and use longer screws if you wish.
This model is a freelance design taking inspiration from various features of the locomotives built for the Festiniog Railway by George England. Ideal if you like the look of the England locos, but are not modelling the Festiniog Railway.
This model features sandpots, chimney and smoke box door that were fitted by the FR.
Designed to suit Bachmann N gauge Percy chassis.
Requires:
Bachmann N gauge Percy chassis
Ø0.31 brass wire
Alan Gibson 4mm Short handrail knobs G4M53 or equivilant.
Ø6.2, 9mm gauge wheels for the tender. Graham Farish and Dundas Models wheels fit this model.
Assembly advice:
Preparing the chassis:
Remove body from the Bachmann Percy by undoing the four screws under the cab and cylinders.
Undo the 3 screws to remove the chassis keeper plate. Take out the existing N gauge couplings.
Cut the sprue between the firebox and front buffer part and trim or file back to the flat surfaces.
Fit the firebox into the rear coupling pocket and the front buffer into the front coupling pocket, checking they are the correct way up. Reattach the keeper plate with the 3 screws.
Adding brass wire:
Add Ø0.31 brass wire through the handrail knobs. No drilling is needed for the knobs and is not recommended as it could break them. Take your time with this step. I threaded a full length of wire through the knobs, marked the end gently with a knife, then removed the wire before trimming to length and re-installing.
Bass wire is also used for:
Whistle chords.
The whistles can be replaced with brass ones if desired by removing the plastic ones and drilling out the holes marked inside the saddle tank.
Handrail knobs are required for the front of the smokebox and sides of the tank.
Fitting the body:
Attach the body with the two rear screws. Due to the way the Percy is designed, the front screws cannot be used as printed material isn't strong enough to replicate the spigot. You could cut the spigots off the print and use longer screws if you wish.
Details
What's in the box:
Medium George England ~ 4mm Scale FR Style
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
