Gruppo 3 di 4 segnali in scala N
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$25.73
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Il kit contiene le parti necessarie a realizzare 4 segnali completi a vela rotonda su staffa laterale. Ogni segnale e' composto da tre parti: palo, segnale e bordo bianco. Ripulite le tre parti dai residui di cera, soprattutto all'interno del palo cavo, e' possibile assemblare il tutto aggiungendo un led a tre colori (rosso, verde e giallo) che puo' essere acquistato con i conduttori gia' saldati al seguente link: https://www.ebay.it/itm/T0603RGY-40pcs-Pre-soldered-micro-litz-wired-leads-Red-Green-Yellow-SMD-Led-0603-/202529500495. Il segnale e' predisposto per far passare i conduttori elettrici all'interno del palo.
Nota bene: per quanto questo modello sia già stato realizzato numerose volte, può capitare che shapeways si rifiuti di stamparlo, adducendo problemi tecnici. Ci scusiamo della cosa, la quale è completamente indipendente dalla vostra volontà; se ciò dovesse verificarsi l’ordine verrà annullato e non vi verrà addebitato alcun costo.
This kit contains all parts required for 4 signals with round panel on lateral bracket. Each signal is composed of three parts: pole, signal and white frame. Once cleaned up the three parts to remove wax residues, especially inside the pole, you can assemble it all by adding a three colors LED (red, green and yellow) that can be purchased with the wires already welded by ebay at the following link: https://www.ebay.it/itm/T0603RGY-40pcs-Pre-soldered-micro-litz-wired-leads-Red-Green-Yellow-SMD-Led-0603-/202529500495 . The signal is designed to pass the electrical conductors inside the pole.
Disclaimer : although this model has already been created numerous times, it may happen that shapeways refuses to print it, citing technical problems. We apologize for this, which is completely independent of your will; should this occur, the order will be canceled and you will not be charged any costs.
Nota bene: per quanto questo modello sia già stato realizzato numerose volte, può capitare che shapeways si rifiuti di stamparlo, adducendo problemi tecnici. Ci scusiamo della cosa, la quale è completamente indipendente dalla vostra volontà; se ciò dovesse verificarsi l’ordine verrà annullato e non vi verrà addebitato alcun costo.
This kit contains all parts required for 4 signals with round panel on lateral bracket. Each signal is composed of three parts: pole, signal and white frame. Once cleaned up the three parts to remove wax residues, especially inside the pole, you can assemble it all by adding a three colors LED (red, green and yellow) that can be purchased with the wires already welded by ebay at the following link: https://www.ebay.it/itm/T0603RGY-40pcs-Pre-soldered-micro-litz-wired-leads-Red-Green-Yellow-SMD-Led-0603-/202529500495 . The signal is designed to pass the electrical conductors inside the pole.
Disclaimer : although this model has already been created numerous times, it may happen that shapeways refuses to print it, citing technical problems. We apologize for this, which is completely independent of your will; should this occur, the order will be canceled and you will not be charged any costs.
Details
What's in the box:
Gruppo 3 di 4 segnali in scala N
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
