Phillips LCD TV 3'' Woofer Spacer

This is for the DIY Boombox Bluetooth enthusiast and MAKERS.  It is a build upon YouTuber Modiane1's basic hack tutorials that feature the Phillips 2-Way LCD TV Speaker Module. 

These are cutout cover mounts that save hacking time, while making your speaker project look clean and a bit more professional. 

These are the basic three Phillips Speaker Module Variations that are all compatible with these cover mounts:

1. Philips 314113000221 R TMM 2-Way LCD TV Speaker Module 8 Ohm.
2. Philips 314113000201 R TMM 2-Way LCD TV Speaker Module 4 Ohm.
3. Philips 314113000191 L TMM 2-Way LCD TV Speaker Module 4 Ohm.

Product:  Phillips 2-Way LCD TV 3'' Woofer Spacer.
You'll find that some of the most rugged enclosures are made for kids, but the bullet proof things use a 3 Inch speaker.  Well, this 3" spacer ring fixes that! 

Holding on to your childhood boombox?  Well, upgrade and turn it into a grown-up BEAST!  Take your little monster further:  Drill some 1 -1/4 tweeter holes and mount up with our 40mm grilled specials.  Find the color that works great with it.  No grind time needed.  Woofer Speaker tabs stay on!

Please look at all available variations on the Speaker Cover Mounts to decide on your project's best fit.  Some accept the 60mm Wire Grills, with built in Tweeter Grills that eliminate the need for the smaller 40mm Wire Grill.  That's right, no more grill clearance issues!  Hey, but if your build uses a 40mm Wired Grill, our Solo 40mm Tweeter Mount is available either grilled or grill-less.

Bird Nerd Specs:

For Phillips 2-Way LCD TV Woofer: A 3'' (76.2mm) Spacer Ring.  So, any enclosure made for a 3 Inch speaker would upgrade just fine.  Protruding height from inside surface will be 5.5mm.

 █ ▇ ▆ ▅ ▄ ▂ ▁

All Related Phillips 2-Way LCD TV Speaker Products:

Phillips 2-Way LCD TV Speaker Mount "A":

• Left + Right FULL: Mount for (2) Woofers, (2) Tweeters.

Phillips 2-Way LCD TV Speaker Mount "B":

• Left + Right FULL: Mount for (2) Woofers, (2) Tweeters and (1) 0.28" Voltmeter HORIZONTAL.

Phillips 2-Way LCD TV Speaker Mount "C":

• Left + Right FULL: Mount for (2) Woofers, (2) Tweeters and (2) 0.28" Voltmeter HORIZONTAL.

Phillips 2-Way LCD TV Speaker Mount "D":

• Left + Right FULL: Mount for (2) Woofers, (2) Tweeters and (1) 0.28" Voltmeter VERTICAL.

Phillips 2-Way LCD TV Speaker Mount "Left Half":

• Left Half:  Mount for (1) Left Woofer and (1) Left Tweeter.

Phillips 2-Way LCD TV Speaker Mount "Double Left Half":

• Left Half Double:  Mount for (2) Left Woofers, (1) Left Tweeter, (1) 0.28" Voltmeter and (1) 0.56" Voltmeter HORIZONTAL.

Phillips 2-Way LCD TV Speaker Mount "Right Half":

• Right Half:  Mount for (1) Right Woofer and (1) Right Tweeter.

Phillips 2-Way LCD TV Speaker Mount "Double Right Half":

• Right Half Double:  Mount for (2) Right Woofers and (1) Left Tweeter and (2) 0.28" Voltmeter HORIZONTAL.

Phillips 2-Way LCD TV Speaker Mount "Left Solo 60mm":

• Left Solo 60mm: Mount for (1) Left Woofer.

Phillips 2-Way LCD TV Speaker Mount "Right Solo 60mm":

• Right Solo 60mm: Mount for (1) Right Woofer.

Phillips 2-Way LCD TV Speaker Mount "Solo 40mm GED":

• Right Or Left Solo 40mmGED: Mount for (1) Tweeter GrillED.

Phillips 2-Way LCD TV Speaker Mount "Solo 40mm GLESS":

• Right Or Left Solo 40mmGLESS: Mount for (1) Tweeter Grill-LESS.

Phillips 2-Way LCD TV Speaker Mount "3' Woof-Woof Ring":

• 3 Inch Spacer Woofer Ring (76.2mm).

Phillips 2-Way LCD TV Passive Radiator Mount:

• Oval Shaped Passive Radiator Mount  +  FREE Quarter Coin Bass Booster Mount.      

      * All Tweeter Mounts snugly hold the Crossover Capacitor.

Voltmeter Mount Size + Position Variants:

• A voltmeter is a numbered digital display of power being put out measured in volts.  For Example, Your project might use 12v DC Lithium Batteries, or you could have a hacked 12v wall charger that converts 120v AC IN to 12v DC OUT.  So at a glance, a voltmeter gives visual cues of the current power your source is putting out.

 

• We have 0.56" and 0.28"(mini) Voltmeter Mount variants.  Made specifically for the see through enclosure.  Will sit flush against the clear face.  Positioning options can be any horizontal or vertical combinations.  Directly molded into a Speaker Mount Design for a clean all in one package.

Compatibe Enclosure Examples:

Brands: Fisher Price, Playskool, Sony "My First Sony", etc... 

 █ ▇ ▆ ▅ ▄ ▂ ▁

Who Am I?
I am a MAKER.  I go by Ulyssandra.  My MAKER signature is the Crossed Warhammers of Orin Razen.  When you see my mark take heed.  The designs are so damn good you might just pass out and faint! 

Calling All Mandalorians, Wet Boy Assasins, Ninja Looters, and fans of all that is Geek. If you want it, put a bounty on it!  Hit up my store at www.BountyRoundUp.com.