Fatshark Predator V2 250mw transmitter (TX) fitted
This is a small box that contains the rather lumpy transmitter supplied with the Fatshark Predator V2. The TX slides neatley into it and then two small nut/bolts or split pins can be used to seal it up.
The box is designed to allow air flow to the TX heatsink that gets very warm in use.
This design incorporates a flat surface for velcro or sticky pads to adhere too as well as a slot for a velcro to be passed through.
This is the same part that is integrated into the d3wey DJI Phantom Custom FPV Undertray but this version is stand alone.
It may work with other TX's. The internal space dimensions for the TX are:
*** - Please Note - *** As with any Shapeways product please be aware of what you are buying. This is a custom designed part not mass produced. It has a slighty rough finish (but nothing that will scratch items). I make every effort to test all my designs but I regret manufacturers do change their products from time to time. If in doubt please contact me.
6.4 w x
5.1 d x
2.52 w x
2.008 d x