Since the response has been so great. I am raising funds on Kickstarter to offer a more refined product with nickel plating and milled from steel. Click here to support my Kickstarter

Even if you would like to order the 3D printed version here, please consider backing the Kickstarter to help me launch the product more affordably and with greater fidelity.

Have a new MacBook? Here's a little tool to help you keep a MagSafe adapter on you at all times :) And here is a link to the converter just in case, Apple Store MagSafe Converter

Flip Key Top Shell for Nissan Qashqai, with extruded logo New V4 Model.

This is a V4 top shell, so must be ordered with a V4 bottom shell.

Chiave a scatto per Nissan Qashqai guscio superiore con scritta Qashqai in rilievo. Nuovo modello V4.

Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&

A triply model, composed of three interlocked but separate matrices, which is nearly impossible to make without 3d printing!
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).

Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.

Big available here: here it is.

Flip Key Top Shell for Nissan Qashqai, with cutted logo New V4 Model.

This is a V4 top shell, so must be ordered with a V4 bottom shell.

Chiave a scatto per Nissan Qashqai guscio superiore con scritta Qashqai scavata. Nuovo modello V4.

Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&

Put it with your keys on a key ring,
hang it on a chain / rope,
or lay it on a flat surface.

The hole for the chain / ring is 4.5 mm wide in diameter.

To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.

Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.

Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.

A strong, sturdy, surprisingly sharp claw that would be the envy of any preying animal. Wearing this won't turn you into Wolverine--think more like someone who beat up Wolverine Jr in a bar fight and took a trophy.

Easy opening of ketchup packets, salad dressing packets, etc.
Simply slide a standard x-acto blade into the slot and clip a thin keyring through the hole.
Slide the corner of the packet through the slot and there you have it!

The Mini Crowbar is both a decorative as well as practical keychain accessory (length of a typical key). It can be used for screwing, puncturing or as a keychain hanging hook.
 

Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy). Please choose from the right.

 

Warning: This crowbar is size small, about 30% smaller than the medium one.

Flip Key Bottom Shell for Nissan Qashqai, with Qashqai style logo and Nissan logo, New V4 Model.

This is a V4 bottom shell, so must be ordered with a V4 top shell.

Text and logo will be engraved, and in the same color of the shell. They are higlighted in white in this pictrure just to show better the final result if you decide to paint them.

Chiave a scatto per Nissan Qashqai guscio inferiore con logo Qashqai stilizzato e sede per logo Nissan. Nuovo modello V4. LEGGETE LE ISTRUZIONI NEL LINK QUI SOTTO

Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&

Personalize your very own Guitar Pick with Pix Pic!

Pix Pic is the first of its kind on Shapeways because it allows you to design a guitar pick - From Scratch! All that you have to do is download the template, draw all over it, then upload it back to Shapeways. Then, within 10-12 business days, you will receive your custom Pix Pics!

Don't play the guitar? Pix Pics are not for just one use, they are universal and can be used in almost any application. Some examples are...

- Awesome Guitar Pick
- Design your Pix Pic to with a hole in the top so that you can create your own....
- Pix Pic key chain!
- Pix Pics Earrings!
- Pix Pic Necklace!
- Pix Pics Bracelet
- Pix Pics...Some other jewelry item!
- A one of a kind business referral tool! (put your company logo on the Pix Pic!)
And many many more!

So what are you waiting for? Order your personalized Pix Pics today!

Download your Sketch Sheet Here:
http://jakedrews.webs.com/PixPicTemplate.pdf

Have a question? Comment? Suggestion? Please feel free to contact me either through Shapeways or my website, http://JakeDrews.Com.

DNA double helix, for use in a keychain, to be used in complement to the moebius DNA pendant and bracelet. Check out my shop for more.

Inspired by stone age weaponry, this arrow tip is an archetype charm that gives it's wearer strength and power to withstand the challenges of our everyday lifes.
Antique Bronze Matte, Stainless Steel or Gold Plated Matte are our personal favorites, as they emphasize the design with an authentic look and feel.
We recommend using a leather or rubber necklace. (Diameter of the hole is 4 mm, so any necklace of your choice should fit)
Also designed to be used as a key fob.

The Marble Cage is a cage to turn a 7/8" marble into a keychain.
The cage is to be closed with a keyring.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.

Read this post for more information
A new version is also available.

Marble, keyring or necklace not included.

A double caged pendant with a few twists!
It contains an ambigram, made from two characters of your choosing.
The outer cage is connected to the ambigram,
which can rotate freely around the inner cage. (See the video!)

The used font is "Deja Vu Sans Mono".
I will do my very best to make each combination into a nice ambigram and make it fit snuggly inside the cage.
Leave a "remark for the designer" if you wish to see the model before I finalize your version.

It is also possible to use any symbol, model, logo you like, contact me with details and I'll make it happen!
I will add more examples over time.

Necklace not included.

Flip Key Shell for Nissan Qashqai, with negative logo

This is a V3 top shell, so must be ordered with a V3 bottom shell.

QASHQAI logo is negative, allow you to fill it with painting, for decoraions.

LOGO QASHQAI in negativo, profondo circa 0,3 mm da poter riempire con colore (credo lo smalto sia il più adatto). LEGGETE LE ISTRUZIONI QUI SOTTO

Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&

EZAC sleutelhanger met gat

It's a Turtle!! Ok, just a small figurine of a turtle i made some time ago. To view a render of the model to see how it original looked like, you can visit the deviantart link in http://fav.me/d37d0ih

Flip Key Shell for Nissan Qashqai, with extruded logo

This is a V3 top shell, so must be ordered with a V3 bottom shell.

LEGGETE LE ISTRUZIONI QUI SOTTO

Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&

This is my small one-piece driver/spanner tool with a number of different driver points:
6.5 x 1.2mm flat driver,
No.2 posidriv driver,
5mm hex driver,
4mm hex driver,
T25 torx driver,
1/4" hex bit driver,
13mm socket spanner.

An o-ring is required to complete the assembly to help hold a 1/4" square drive socket on the square post (5mm ID, 1mm diameter, not included).

This model is designed to be printed in Stainless Steel or one of it's variants.
The tool can easily be secured to a keychain or lanyard with a 10mm split ring or a No.2 McGizmo clip or similar 25mm gate clip using the hole in the flat driver.

There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.

5.2cm tall creeper keychain, hollow inside with a 1.3mm wall. Textured on all sides, with a 5mm loop to fit your key ring. Does not sneak up on you. Does not explode.

I'm afraid of a lot of things ... one is to lose my keys!
To avoid this nightmare, I'm using a keychain.
So far, it was a little difficult to remove the chain, e.g. if you want to use a key...
Now, with this belt clip, the keychain is pretty save but can also be removed very easy.

The belt clip comes without keychain!

There is another Belt Clip here.
This one is made of stainless steel.

This keychain can be used to unlock shopping carts without leaving the key in the cart. It is based on a Norwegian 10 kroner, but it is also tested to work with carts taking euros.

Flip Key Shell Bottom side for Nissan Qashqai.

This is a V3 bottom shell, so must be ordered with a V3 top shell.

LEGGETE LE ISTRUZIONI QUI SOTTO

Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&

Have you ever wanted to watch a movie on your iPhone, but didn't like holding it? Have you ever wanted a keychain gadget that would hold it for you? Then check out the iPhone Movie Stand!

From the Jake Drews Strange Gadgetry Collection of Sometimes Fantastically Amazing Inventions comes a fully customizable piece that is sure to find a home on your keychain. Its convenient size makes it possible to attach to your current set of keys, while also maintaining physical function and beautiful aesthetics. You can even add your initials (or someone else's initials) to the stand to personalize this "must have" gadget. The iPhone stand also works great with the iPod Touch as well! Although this device has not been tested with the iPad, it should work, but 2 stands may be required to stability.