by
aeron203
A clock frozen in time, the Time Keeper commemorates a birth date, an anniversary, or any other significant moment in your life, in history, or the future. It will keep that time with perfect accuracy, forever. You set the date and time. You can also include a short message below the date. The Time Keeper Pendant is 75% of the original size. 1.5 inches wide. UPDATE: The Time keeper has been thickened 50% to ensure printability.
by
Innovo
This item appears to be a regular pendant depicting irregular lines and geometric shapes.
When viewed from the side, at the correct angle, this pendant reveals a secret message custom-made for the individual wearer. Engraved on the back, will be the name of the sender or receiver.
The perfect gift to let someone know your feelings :-)
Notes: Improvements were made on the prototype shown. The 3d viewer depicts more accurately the final product.
Minimum characters per message (capital letters): 10
Maximum characters per message (capital letters): 20
WARNING: The size of the final product may differ (shorter/thicker) depending on each custom design. It will never be more/less than 20% of the original.
by
trompevenlo
A simple yet elegant piece you'll love to wear. It was inspired by Robert Indiana's world-famous Philadelphia LOVE sculpture. The pendant is about 1" (2.5 cm) in size and looks absolutely gorgeous in Sterling Silver. As a low-cost alternative, the pendants are also made available in variations of plastic.
We will personalize your LOVE pendant with an engraving of up to 4 letters, as shown on the image above.
Please specify your desired engraving (up to 4 letters) on the personalization page.
All items are made to order and we can always make them available in other sizes and materials.
Other sizes and materials may require some changes to the design files, please send your order enquiry to : prior to ordering.
Symbols (pendant collection)
Things (pendant collection)
Time (pendant collection)
The Scrappies
We will personalize your LOVE pendant with an engraving of up to 4 letters, as shown on the image above.
Please specify your desired engraving (up to 4 letters) on the personalization page.
All items are made to order and we can always make them available in other sizes and materials.Other sizes and materials may require some changes to the design files, please send your order enquiry to : prior to ordering.
Related products
Symbols (pendant collection)
Things (pendant collection)
Time (pendant collection)
The Scrappies
by
Bathsheba
Two letters fused into a 3D block. What an eyecatching way to showcase two initials! Yours will be ¾-1" (2-2.5cm) tall depending on the letters. Choose from Comic, Typewriter, Block or Script font, shown in the picture above.
A larger size is here.
Do you need a hanging loop? If neither letter has a closed loop (like O, P, B etc.) and you want to use this as a pendant, you will need that. Let me know in the instructions box please? Thanks....
Do three letters work? Sometimes, find out more here.
by
virtox
A double caged pendant with a few twists!
It contains an ambigram, made from two characters of your choosing.
The outer cage is connected to the ambigram,
which can rotate freely around the inner cage. (See the video!)
The used font is "Deja Vu Sans Mono".
I will do my very best to make each combination into a nice ambigram and make it fit snuggly inside the cage.
Leave a "remark for the designer" if you wish to see the model before I finalize your version.
It is also possible to use any symbol, model, logo you like, contact me with details and I'll make it happen!
I will add more examples over time.
Necklace not included.
It contains an ambigram, made from two characters of your choosing.
The outer cage is connected to the ambigram,
which can rotate freely around the inner cage. (See the video!)
The used font is "Deja Vu Sans Mono".
I will do my very best to make each combination into a nice ambigram and make it fit snuggly inside the cage.
Leave a "remark for the designer" if you wish to see the model before I finalize your version.
It is also possible to use any symbol, model, logo you like, contact me with details and I'll make it happen!
I will add more examples over time.
Necklace not included.
by
aeron203
This handsome tag will add a touch of stately elegance to your dog's collar.
Write up to nine characters on the front, three lines of contact information on the back.
Write up to nine characters on the front, three lines of contact information on the back.
by
spinfaces
Customizable dog tags, standard 2 inches long. Send me a simple image to have whatever you want sculpted into the geometry and ready to print! Initials, simple designs, ink fingerprints, ect... let me know if you would like something on the back as well!
by
Magic
The Happy Event Bead is similar the the Hollow Marble.
The difference is that it has slightly bigger holes (3 mm instead of 2.5) and these holes are not centered, so that the bead always shows the same side: this marble is intended to be used as a bead on a necklace without any holder (just insert the necklace into one hole and make it exit from the other one).
In this way, you can make a necklace with one bead for each significant event of your life (your own birth, your graduation, your wedding, etc. but it is mainly intended for the birth of your children).
Read this message for more information.
Suggestion for the Mother Day: offer to your wife a bead with the picture of your children on one side and a text saying "Happy Mother Day 2011" on the other side!
Necklace not included.
The difference is that it has slightly bigger holes (3 mm instead of 2.5) and these holes are not centered, so that the bead always shows the same side: this marble is intended to be used as a bead on a necklace without any holder (just insert the necklace into one hole and make it exit from the other one).
In this way, you can make a necklace with one bead for each significant event of your life (your own birth, your graduation, your wedding, etc. but it is mainly intended for the birth of your children).
Read this message for more information.
Suggestion for the Mother Day: offer to your wife a bead with the picture of your children on one side and a text saying "Happy Mother Day 2011" on the other side!
Necklace not included.
by
Heng
The Solaro calendar is a nice looking and unique way to make a calendar based on the position on the Planets in our Solar System. The starting date is represented by the spheres and the ending date by the rings on the orbits. The configuration is absolutely unique and only repeats every 10 billion years. The look will change for everybody's date. Just tell me what 2 dates you want and I will generate the 3D for you to order. you can use it as earrings or necklace pendant or pin. ( tell me how you want to hook it up) .size is around 5-6cm diameter.
I like the fact that in millions of years someone could find out exactly what date this was whitout any calendar system or time units.
I like the fact that in millions of years someone could find out exactly what date this was whitout any calendar system or time units.
by
geneius4
A recreation of the Boss key from Wind Waker.
This version features engraved custom text on the back side. For a version with just the crest, see this one: http://www.shapeways.com/model/159064/boss_key_ww_large.html?gid=ug41599
I reccomend printing in Stainless Steel, with any of the available finishes.
To order, select a material, then click the "Personalize" button above.
This version features engraved custom text on the back side. For a version with just the crest, see this one: http://www.shapeways.com/model/159064/boss_key_ww_large.html?gid=ug41599
I reccomend printing in Stainless Steel, with any of the available finishes.
To order, select a material, then click the "Personalize" button above.
by
Innovo
This item appears to be a regular pendant depicting the initial letter of the wearers name.
When viewed from the side, at the correct angle, this pendant reveals the full name of the initial letter, custom-made for the individual.
A different and original gift for yourself or that someone ''special''.
Notes: Minimum characters per message: 4 Maximum characters per message: 10
WARNING: The size of the final product may differ (shorter/thicker) depending on each custom design. It will never be more/less than 20% of the original.
When viewed from the side, at the correct angle, this pendant reveals the full name of the initial letter, custom-made for the individual.
A different and original gift for yourself or that someone ''special''.
Notes: Minimum characters per message: 4 Maximum characters per message: 10
WARNING: The size of the final product may differ (shorter/thicker) depending on each custom design. It will never be more/less than 20% of the original.
by
jeff
Building Block is a keepsake dedicated to a newborn. Each side holds a piece of information specific to the baby. Three sides are given to the baby's initials and the remaining three sides are date & time of birth and weight. The keepsake can hang (ribbon for hanging not included) or sit anywhere to remember how one life came into this world. A Building Block.
Simply enter the information specific to the baby, choose your material, and a customized Building Block will be created.
Starting at $40 in plastic, you can get a truly unique and thoughtful gift.
Simply enter the information specific to the baby, choose your material, and a customized Building Block will be created.
Starting at $40 in plastic, you can get a truly unique and thoughtful gift.
by
opresco
FATHER'S DAY SPECIAL: CUSTOM PLANETARY KEYRING WITH CUSTOM CAPTIVE DESIGNER'S LOGOTYPE TAG AND 6 CAPTIVE RINGS • Six captive rings can move in any direction only around three axes :) • The design was tested in White Strong and Flexible and it works/feels beautifully; I'm pretty sure the wizards at Shapeways have already found a way to support the rings and prevent fusing when ordered in Stainless Steel or Gold Plated Stainless Steel • Click on "Create Your Own" button to specify your initials; The designer will replace his mark/logotype on the captive tag with a custom designed 3d mark/logotype for you.
by
WillLaPuerta
Customizable cartouche with a selection of hieroglyphs to print any name of your choice. I'm no expert, so I use this site (http://hieroglyphs.net/0301/cgi/pager.pl?p=42) to translate the names phonetically.
From what I've looked up, the ancient Egyptians didn't tend to write the vowels, so your name may look a lot shorter than you'd think. If you want more of a "letter by letter" approach, I can use this site (http://www.quizland.com/hiero.htm) but you''ll have to tell me.
Let me know if either of those sites go down, since I'll have to find new ones.
I'm also told that names often had the glyph for "man" or "woman" at the end, so if your name isn't obvious you'd better let me know about that, too.
Right now it says "Samantha" on it since that was the first name I could come up with that was long enough to look interesting. Well, "Smnta" really, but I used the first site and it got compressed a lot. So click the Personalize button and I'll get right on it. Unless your name's Samantha, in which case it's all ready for you!
From what I've looked up, the ancient Egyptians didn't tend to write the vowels, so your name may look a lot shorter than you'd think. If you want more of a "letter by letter" approach, I can use this site (http://www.quizland.com/hiero.htm) but you''ll have to tell me.
Let me know if either of those sites go down, since I'll have to find new ones.
I'm also told that names often had the glyph for "man" or "woman" at the end, so if your name isn't obvious you'd better let me know about that, too.
Right now it says "Samantha" on it since that was the first name I could come up with that was long enough to look interesting. Well, "Smnta" really, but I used the first site and it got compressed a lot. So click the Personalize button and I'll get right on it. Unless your name's Samantha, in which case it's all ready for you!
by
photosfromrob
Design your own necklace or pendant. Proudly wear your name or message, or that of a loved one. Use up to 10 letters. The letters are 10mm high...that's about 3/8in.
by
Fairesure
Mjolnir pendant with some extra places for engraving. If you need some runes\letters on it - let me to know :o)
by
opresco
Could be worn as a Pendant.
Your Text (min. 35 – max. 50 characters, including word spaces; same text on both rings; I choose the typeface) – is spread continuously on the singular face of the Mobius band!
The test ring that has been successfully printed in Gold Plated Glossy (shown in the actual pictures) has only a 13 mm Inner diameter! But, as can be seen in the pictures, all 50 characters of text are still very readable!
Click on PERSONALIZE to enter your Text, and, under "Special Instructions" – your Ring Size.
Available ring sizes:
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
===================================
Your Text (min. 35 – max. 50 characters, including word spaces; same text on both rings; I choose the typeface) – is spread continuously on the singular face of the Mobius band!
The test ring that has been successfully printed in Gold Plated Glossy (shown in the actual pictures) has only a 13 mm Inner diameter! But, as can be seen in the pictures, all 50 characters of text are still very readable!
Click on PERSONALIZE to enter your Text, and, under "Special Instructions" – your Ring Size.
Available ring sizes:
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
===================================
by
MichaelMueller
Yeah, dogs are great... but sometimes, they run away.
If your puppy gets lost and doesn't find the way back to you, this badge should help!
It contains the name of your pet and your phone number!
You can costumize this values by clicking "personalize".
A "must have" pendant for all fashion-victim-dogs out there!
If your puppy gets lost and doesn't find the way back to you, this badge should help!
It contains the name of your pet and your phone number!
You can costumize this values by clicking "personalize".
A "must have" pendant for all fashion-victim-dogs out there!
by
sublimate
Help guest keep keep track of their wine glasses with these charms. Spell out their names, initials, or just maybe just some random string of letters.
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
If you need:
1 or 2 characters -
3 or 4 characters -
5 or 6 characters -
7 or 8 characters -
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
If you need:
1 or 2 characters -
3 or 4 characters -
5 or 6 characters -
7 or 8 characters -
by
Creo
This is a Super Cool Lego Style 'Dog Tag' only available in Silver, Silver Glossy and Alumide!
PLUS you can customise it to show your name or phrase! via the Shapeways Co-Creator. This is a totally cool gift for your loved one or a friend :) - get creating NOW!
This default tag has 'Creo Design' on it.
by
JingaButtons
Personalize your buttons with the text of your choice. Available in medium and large sizes, and with sew holes or a shank.
by
bluelinegecko
Does your dog think it's the law around your house? Does it love to protect and serve your home? Why not show others who the top dog is by giving it a symbol of it's authority with this police badge style tag. Features up to 2 lines of customizable text inset on both the front and back. Available in plain stainless steel, bronze finish, gold plated, or in solid Sterling Silver. Your pet is sure to wear this tag with pride. This tag is also available as a pendant or key fob. Want to customize this item beyond what is listed in the co-creator? Feel free to contact me with any custom changes or suggestions.
See my other custom pet tag designs here.
See my other custom pet tag designs here.
by
bluelinegecko
Does your pet support the right to bear arms? Does it enjoy hunting trips and trips to the range? Then I'm sure your dog will apreciate this .45 caliber dog tag. Modelled to the actual dimensions of a .45 auto round, this tag can be ordered with up to two lines of text on back. Available in plain stainless steel, bronze finish, gold plated, or in solid Sterling Silver. Your dog is sure to wear this tag with pride. This tag is also suitable as a pendant. Want to customize this item beyond what is listed in the co-creator? Feel free to contact me with any custom changes or suggestions.
See my other custom pet tag designs here.
See my other custom pet tag designs here.
by
bluelinegecko
Does your dog think it's the law around your house? Does it love to protect and serve your home? Why not show others who the top dog is by giving it a symbol of it's authority with this sheriff's style badge. Available in plain stainless steel, bronze finish, gold plated, or in solid Sterling Silver. Your dog is sure to wear this tag with pride. This tag is also suitable as a pendant or key fob. Also available in a smaller 1" diameter version.
Want to customize this item beyond what is listed in the co-creator? Feel free to contact me with any custom changes or suggestions.
See my other custom pet tag designs here.
Want to customize this item beyond what is listed in the co-creator? Feel free to contact me with any custom changes or suggestions.
See my other custom pet tag designs here.
by
sublimate
Help guest keep keep track of their wine glasses with these charms. Spell out their names, initials, or just maybe just some random string of letters.
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
by
bluelinegecko
Does your dog think it's the law around your house? Does it love to protect and serve your home? Why not show others who the top dog is by giving it a symbol of it's authority with this sheriff style badge. Available in plain stainless steel, bronze finish, gold plated, or in solid Sterling Silver. Your dog is sure to wear this tag with pride. This tag is also suitable as a pendant or key fob. Want to customize this item beyond what is listed in the co-creator? Feel free to contact me with any custom changes or suggestions.
See my other custom pet tag designs here.
See my other custom pet tag designs here.
by
sublimate
Help guest keep keep track of their wine glasses with these charms. Spell out their names, initials, or just maybe just some random string of letters.
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
If you need:
1 or 2 characters -
3 or 4 characters -
7 or 8 characters -
9 or 10 characters -
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
If you need:
1 or 2 characters -
3 or 4 characters -
7 or 8 characters -
9 or 10 characters -
by
Gilligonia
YOUR NAME in a heart pendant! - Great for Weddings and Anniversaries!
Have a long name? A 4 Line version is available.
Designed specifically to be printed in Stainless Steel.
If you Prefer Silver, the following model is less expensive only a bit smaller and specifically designed to be printed in Sterling Silver. Also available in Plastic.
To PERSONALIZE your foot, FIRST you must login to shapeways, if not already. (Very top of page on the right)
Then click the "Personalize 1st" button below.
This will take you to the Gilligonia web page. You
will be given an ID Code and interactively create your Personalized Text.
When you return to the Shapeways page, CLICK the "Personalize" button above right. This will open up a form. Then PASTE the "ID Code and Personalized Text" where indicated on the form.
NOTE: Necklace cord is NOT included.
NOTE: Black Box not Velvet bag included ONLY with Gold plated or Silver!
by
Gilligonia
YOUR NAME on a foot pendant! - Great for your Hash Name!
Two Lines of Text per side, Four Lines total. 12-16 characters per line (fewer with "W" and "M")
Have a short name? A cheaper 1 Line version is available.
Designed specifically to be printed in Stainless Steel.
A less expensive Plastic version is available.
If you Prefer Silver, the following model is less expensive, only a bit smaller and specifically
designed to be printed in Sterling Silver.
To PERSONALIZE your foot, FIRST you must login to shapeways, if not already. (Very top of page on the right)
Then click the "Personalize 1st" button below.
This will take you to the Gilligonia web page. You
will be given an ID Code and interactively create your Personalized Text.
When you return to the Shapeways page, CLICK the "Personalize" button above right. This will open up a form. Then PASTE the "ID Code and Personalized Text" where indicated on the form.
by
sublimate
Help guest keep keep track of their wine glasses with these charms. Spell out their names, initials, or just maybe just some random string of letters.
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
by
bluelinegecko
Throw away that cheap petstore tag and treat your pet to this custom 3-D printed stainless steel pet tag. ( Or get one for yourself and wear it as a pendant.) Available in plain stainless steel, bronze finish, gold plated, or in solid Sterling Silver. Your pet is sure to wear this tag with pride.
Tag Features:
*Rotated Eyelet so that tag hangs correctly on most pet collars/necklaces.
*Rounded egdes to protect from cuts/scratches
*Text in relief on front side, 3 lines of text inset on back side (optional).
*Font on front is "Freestyle Script"
Want to customize this item beyond what is listed in the co-creator? Feel free to contact me with any custom changes or suggestions.
See my other custom pet tag designs here.
Tag Features:
*Rotated Eyelet so that tag hangs correctly on most pet collars/necklaces.
*Rounded egdes to protect from cuts/scratches
*Text in relief on front side, 3 lines of text inset on back side (optional).
*Font on front is "Freestyle Script"
Want to customize this item beyond what is listed in the co-creator? Feel free to contact me with any custom changes or suggestions.
See my other custom pet tag designs here.
by
jgordon0893
Customized stainless steel dog tag. Elegant design is strong and will not bend, break, or wear over time. Will customize with pet name or pet name + phone number.
by
sublimate
Help guest keep keep track of their wine glasses with these charms. Spell out their names, initials, or just maybe just some random string of letters.
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
If you need:
1 or 2 characters -
3 or 4 characters -
5 or 6 characters -
9 or 10 characters -
Use to string them on for a wine charm, or string them on a string with beads for a necklace.
Sets of multiple rings available also:
If you need:
1 or 2 characters -
3 or 4 characters -
5 or 6 characters -
9 or 10 characters -
by
Gilligonia
