Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.

Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.

If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.

Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.

Some of the mentions of Pod à porter when it was originally released:

Wear your shuffle and nothing else...
gizmodo.com

Pod à porter, a 3d-printed iPod shuffle necklace
wired.com

Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com

Very smart.
joshspear.com

mocoloco.com

notcot.org

ilounge.com

design-milk.com

NY Times mentions Pod å`porter!
nytimes.com

Tool, symbol or both?

The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.

I recommend using it with a red leather cord of about 78 cm/ 31 inch.

If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).

Why should your plants stay at home? They help clean the air you breathe, are beautiful, and create a wonderful conversation starter. Carry a sprout, a succulent, or a flower you found on your morning walk. When buying this wearable planter through Shapeways, your necklace will come unfinished and without a cord. You can add a silver or leather cord of your choice to your necklace, or you can email hello@wearableplanter.com and we will mail you a leather cord for your planter.

A small necklace to carry plants with you throughout the day. Works well with a small succulent planted inside, or fresh picked flowers. When this is printed in Shapeways' detail materials, it is watertight and can accommodate a plant with some water. If you purchase this item from our Shapeways shop, please email hello [at] wearableplanter.com and we will send you your choice of leather or cotton cord to go with your necklace, as well as instructions on how to add plants.

Some people are hurt on the outside, but some have their pain somewhere a bit deeper. Wear this pendant to show your awareness of the kinds of pains that can't be seen.

This pendant was made in homage of a certain visual novel that celebrates ones overcoming their wounds that lie both on the inside as well as the outside.

Being at just over one inch square, it is the perfect size for either men or women.

The Lotus top is a graceful form that embraces the upper body, accentuating the shoulders and clavicles. It's name comes from its unique design that blooms at the center opening, allowing the wearer to put her head through and rest it comfortably on the neck and shoulders.

A perfect fit requires a 3D body scan. Email Contact (at) ThreeFormFashion.com for more information on full service scanning and fitting.

Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.

Inspired by Maori and Pacific Island bone carvings this is the second in a series of Torus based necklaces that feature a tesselating pattern that wraps the geometric form in three dimensions. At first glance the shapes may appear to be simply cut into the skin of the object but when held in your hand and rotated the repeating pattern begins to reveal itself. 

The image shows the pendant printed in Stainless Steel but it is available in a variety of material choices including plastic, sterling silver and gold.
The pendant does not ship with a necklace but when combined with a simple leather cord as shown in the images it makes a very unique conversation starting peice of jewelry.

Why should your plants stay at home? They help clean the air you breathe, are beautiful, and create a wonderful conversation starter. Carry a sprout, a succulent, or a flower you found on your morning walk. This item is sold through Shapeways without a cord. If you would like to purchase it with a cord, check out my Etsy store, colleenjordan.etsy.com.

This steampunk-inspired pendant features three gears that spin round and round the center handle and gear. The gears, front, and clock hand all spin at different rates, producing a fascinating spin that will keep even the most fidgety hands occupied.

For the full effect, take a look at the video on youtube!

Thanks to José I. Romero for an insane amount of work on this design.

This Universal Equinoctial Ring Dial 2 is a portable and self-orientating sundial. You can see how a similar dial works: http://www.sunwatchmaker.com/instructions.php .

This is an improved version of a previous model:
http://www.shapeways.com/model/132928/universal_ring_dial.html

You'll receive five parts unconnected and undyed. Follow these instructions:
1. Clean the parts with cold water and soft brushing to remove support material remaining from the 3d printing.
2. Dip the parts in cold tea for a couple of hours. Holes will get more dyed because of the support material trapped in them. The slider part doesn't have marks, but with the dying will get as yellowish as the other parts.
3. Paint with black ink the marks. Let dry the ink and then remove it with a wet sheet. This way, ink only remains in the marks. In the photo the slider and some zones of the rings weren't inked so they maintained the yellow tone because tea dyes all no flat surfaces. The hour ring has marks on both sides, but only one needs to be dyed.
4. Enter the slider with a little pressure through the slit of the central (month) bar. It's only possible over June and July marks. Then move the slider to the desired month and day mark. Each mark represents two days.
5. Deform lightly the meridian ring (the bigger one) in order to insert the hour ring. Be sure that both rings have their dyed faces on the same side when in folded position.
6. Deform again the latitude ring to put the central bar in position. Check the photo for the right orientation.
7. Finally, insert the eyelet through the "jasolo fecit" part of the meridian ring and displace it to the latitude value of your location. To improve the sliding of the eyelet, you can clean the path with a stick before the insertion (again the support material).

You can purchase the individual parts in case you need any replacement:
- Meridian ring: http://www.shapeways.com/model/185486/universal_ring_dial_2__meridian_ring_part_.html
- Hour ring: http://www.shapeways.com/model/185480/universal_ring_dial_2__hour_ring_part_.html
- Central Bar: http://www.shapeways.com/model/185737/universal_ring_dial_2__central_bar_part_.html
- Slider: http://www.shapeways.com/model/165846/universal_ring_dial_2__slider_part_.html
- Eyelet: http://www.shapeways.com/model/185479/universal_ring_dial_2__eyelet_part_.html

"Kardia" Heart Pendant displays the anatomical beauty of the heart in all its glory. Can be used as a necklace or as a keyring. Please note the pendant is sold without the chain and the pendant shown is produced in Gold Plated Matte.

Oh my heart

beautiful gift for valentines day ! Or just as a present.... This also is a nice design to print in plastics i think...

Also look at a different heart model My twisted heart

New in my collection is the Chaos bracelet, please have a look at Chaos bracelet

Why not buy One Pendant and get Two Skulls:

A high detail human skull with another skull under the hood.

This is modeled after original CT scanning data and not hollow, so relatively heavy and quite expensive to print in metal.
This mini version is 25mm high and easy to attach to a necklace.

---

You are highly welcome to browse the

other designs in our shop:

The Awesome Alligator Skull
The Dinosaur Skull for your desk

or if you got enough skulls, how about

The Hand Skeleton

---

---

If you have any questions or suggestions, please don't hesitate to get in contact.

A cellular pendant. The first necklace to be added to our Cell Cycle collection.

Please note that if you purchase from Shapeways it will not come with a chain. If you would like to receive the chain with your purchase please purchase the pendant directly from our website here

A Beautiful Seahorse Pendant. The metal example shown is in Glossy Antique Bronze material. There's a ring on the top of the head for a necklace. Makes a great gift. $27.78 in Antique Bronze Glossy material. Comes with a 22-1/2" inch-long chain upon request.

This jewel takes inspiration from our background in the aeronautic industry. In this shop is also available a small version. Please note that necklace is not included.

Questo gioiello prende ispirazione dal nostro background nell'industria aeronautica. In questo negozio è disponibile anche la versione piccola. Notare che la collanina non è inclusa

This is the “turbine” series.
See also:
turbine pendant (26mm)
turbine earrings

KioròdesiGn - 3D printed designs
Facebook
Twitter
Tumblr

The Healing Hook symbolizes health to the body and spirit.

The two korus, or swirls, combine in the middle to form a heart, which symbolizes a new beginning of life and brings health and nourishment to the body. The arrow at the end points to exactnesses in character and attitude, which brings health and healing to the body and soul and serves as a reminder that true healing begins from within.

A refined version of our most popular cufflink, we shortened the shaft between the pedal & the chainring to make something that we think looks pretty sweet as a necklace. It works nicely as a lapel ornament too. Chain not included.

  A simple yet elegant piece you'll love to wear. It was inspired by Robert Indiana's world-famous Philadelphia LOVE sculpture. The pendant is about 1" (2.5 cm) in size and looks absolutely gorgeous in Sterling Silver. As a low-cost alternative, the pendants are also made available in variations of plastic.
 
We will personalize your LOVE pendant with an engraving of up to 4 letters, as shown on the image above.
Please specify your desired engraving (up to 4 letters) on the personalization page.   All items are made to order and we can always make them available in other sizes and materials.
Other sizes and materials may require some changes to the design files, please send your order enquiry to : prior to ordering.
   

Related products

Symbols (pendant collection) Things (pendant collection) Time (pendant collection) The Scrappies