opresco
I am the son of Ovidiu Opresco, — I am 100% self-taught: circus acrobat; cascador, stuntman; artist; illustrator and footballplayer ;)
Expertise:
- Lots
by
virtox
A triply model, composed of three interlocked but separate matrices, which is nearly impossible to make without 3d printing!
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).
Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.
Big available here: here it is.
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).
Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.
Big available here: here it is.
by
virtox
A hanging cup for your double espresso the morning after ;-)
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
SheilaMunro
The Neverending Story AURYN Medallion. The model is hollowed out on the backside, backside is flat with grooves. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca
by
stop4stuff
Step Twin - Stepped edge Die - a D6 die (dice) with stepped edges to compliment my 'Stepped corner D6' see; http://www.shapeways.com/model/156671/stepped_die_d6.html?gid=ug43177 .
This die has 18mm sides with 7mm tall numbers and 1.2mm stepping.
See also; http://www.shapeways.com/model/158405/stepped_die_d12.html?gid=ug43177 a D12 featuring stepping under the center of the numbers.
This die has 18mm sides with 7mm tall numbers and 1.2mm stepping.
See also; http://www.shapeways.com/model/158405/stepped_die_d12.html?gid=ug43177 a D12 featuring stepping under the center of the numbers.
by
LincolnK
Have you ever experienced such a great love for someone that it felt as if your heart was going to burst through your chest? It can even feel as if your entire rib-cage is now filled with your heart.
Inspired by my own experience of falling in love, this is a true artistic expression of a deep and pure love.
Makes a meaningful gift for yourself or that very special loved one.
(Pictured with a necklace. Price is for pendant only)
Featured at multiple design shows including Dutch Design Week, Maker Faire, World Maker Faire, SIGGRAPH, and more!
A smaller version is available both as earrings and as a pendant.
Inspired by my own experience of falling in love, this is a true artistic expression of a deep and pure love.
Makes a meaningful gift for yourself or that very special loved one.
(Pictured with a necklace. Price is for pendant only)
Featured at multiple design shows including Dutch Design Week, Maker Faire, World Maker Faire, SIGGRAPH, and more!
A smaller version is available both as earrings and as a pendant.
by
NovastarDesign
My twisted heart
My twisted heart...another great design ;-) Perfect for valentines day or just as present for yourself or your lover....
Also check out a different heart model Oh my heart.
New in my collection is the Chaos bracelet, please have a look at Chaos bracelet
My twisted heart...another great design ;-) Perfect for valentines day or just as present for yourself or your lover....
Also check out a different heart model Oh my heart.
New in my collection is the Chaos bracelet, please have a look at Chaos bracelet
by
MichaelMueller
Harr, harr, pirate stuff.
Ship ahoy!
The default Ring Size is US 6.5.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5
Inside Diameter: 15.7 mm / 0.618 in
Inside circumference: 49.3 mm / 1.94 in
US Ring Size 5.5
Inside Diameter: 16.1 mm / 0.634 in
Inside circumference: 50.6 mm / 1.99 in
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Ship ahoy!
The default Ring Size is US 6.5.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5
Inside Diameter: 15.7 mm / 0.618 in
Inside circumference: 49.3 mm / 1.94 in
US Ring Size 5.5
Inside Diameter: 16.1 mm / 0.634 in
Inside circumference: 50.6 mm / 1.99 in
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
by
A.Square
Let them know that you know that they're watching you. Perfect for soirées at the Soviet embassy.
Sorry, the joints aren't functional: Shapeways doesn't allow moving parts in metal. If that ever changes, you can bet I'll change the design!
Photos are of Sterling Silver (unpolished). I can't guarantee that they'll come out nicely in stainless steel, because I haven't tried it; some detail might get lost. (Let me know how it comes out if you try it!).
Sorry, the joints aren't functional: Shapeways doesn't allow moving parts in metal. If that ever changes, you can bet I'll change the design!
Photos are of Sterling Silver (unpolished). I can't guarantee that they'll come out nicely in stainless steel, because I haven't tried it; some detail might get lost. (Let me know how it comes out if you try it!).
by
aeron203
A clock frozen in time, the Time Keeper commemorates a birth date, an anniversary, or any other significant moment in your life, in history, or the future. It will keep that time with perfect accuracy, forever. You set the date and time. You can also include a short message below the date. The Time Keeper Pendant is 75% of the original size. 1.5 inches wide. UPDATE: The Time keeper has been thickened 50% to ensure printability.
by
Danyboy
The Hipster pick for the 2011 Holiday season!
Our living room wall is decorated with some LP's which are, in turn, decorated with some 3d printed goodness: two birds on a branch, tweeting along to your favourite music. The branch can be clipped onto wall mounts for records.
Goes well with the second clip-on model: the vinyl notes.
Our living room wall is decorated with some LP's which are, in turn, decorated with some 3d printed goodness: two birds on a branch, tweeting along to your favourite music. The branch can be clipped onto wall mounts for records.
Goes well with the second clip-on model: the vinyl notes.
by
SheilaMunro
Intricate Skull Cage, successfully printed in WSF & Antique Bronze. Available for the low price of $39.99 only on Shapeways during the Holiday season. :)
by
virtox
A pair of dangly Triple Matrix earrings.
A mesmerizing shape, composed of three growing, interlocked but still movable matrices.
Nearly impossible to create without 3d printing.
When you order, you will get a pair of these earrings complete with silver hooks, courtesy of Shapeways!
More earrings
A mesmerizing shape, composed of three growing, interlocked but still movable matrices.
Nearly impossible to create without 3d printing.
When you order, you will get a pair of these earrings complete with silver hooks, courtesy of Shapeways!
More earrings
by
virtox
While provocatively curved, she is indeed very shy!
She only allows a glowing glimpse of what she holds inside.
A light shade for LED tea-light or Luxeon/Cree LED
Hiding the source from direct view, resulting in a gentle light emerging
Limited edition
This is the original design, at nearly 20cm high, with 2mm thick walls it is costly to produce.
To compensate, only ten will be produced, currently only six are still available
More
Other sizes and shapes available.
She only allows a glowing glimpse of what she holds inside.
A light shade for LED tea-light or Luxeon/Cree LED
Hiding the source from direct view, resulting in a gentle light emerging
Limited edition
This is the original design, at nearly 20cm high, with 2mm thick walls it is costly to produce.
To compensate, only ten will be produced, currently only six are still available
More
Other sizes and shapes available.
by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Give it a good spin and it moves in erratic and wild ways.
This is the 7.5cm / 3" version, see the Gyro the Forms section for other shapes and sizes.
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Corner stand for this 7.5cm model here.
Notes
Be careful with a cube this size, fingers may get pinched if handled carelesly.
It is not a toy for children!
Also please be careful with (the assembly of) the Alumide version as this material is less flexible/robust than the Strong & Flexible materials.
More
Virtox Shop
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Give it a good spin and it moves in erratic and wild ways.
This is the 7.5cm / 3" version, see the Gyro the Forms section for other shapes and sizes.
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Corner stand for this 7.5cm model here.
Notes
Be careful with a cube this size, fingers may get pinched if handled carelesly.
It is not a toy for children!
Also please be careful with (the assembly of) the Alumide version as this material is less flexible/robust than the Strong & Flexible materials.
More
Virtox Shop
by
Bathsheba
I've seen enough to know where this is going...oh, just kidding. It's a rhombic dodecahedron. With an exotic symmetry group. That's all. Really.
by
Bathsheba
The design I'm trying to make is exactly twice as complex as this one. This stage of it seemed like a good place to pause for a breather.
by
roofoo
Model of a tricycle. This will print as 1 piece, with turnable steering, pedals, and wheels. Riding this trike is strongly discouraged. :p
Note: this best prints in White Strong and Flexible. The steering may be stuck when you first receive it. Simply rotate the steering column back and forth very gently until the powder escapes and the steering becomes loose.
Note: this best prints in White Strong and Flexible. The steering may be stuck when you first receive it. Simply rotate the steering column back and forth very gently until the powder escapes and the steering becomes loose.
by
opresco
This design commemorates The Grand Opening of The New Roosevelt Tram linking
the beautiful Roosevelt Island to Manhattan; and, my 70th Anniversary; I had my ears
pierced – to wear my 3d Printed Genuine Sterling Silver Earrings – for this occasion :-)
See "Le tramway de Roosevelt Island reprend du service."
See my other Roosevelt Island Tram designs here:
Slice of Big Apple with Roosevelt Island Tram
The New Roosevelt Island Tram Cuff-Links
The New Roosevelt Island Tram / Pendant / Keyring
Pendant / Keyring with Roosevelt Island Tram
Keyring with Roosevelt Island Tram
Soccer Ball with Roosevelt Island Tram inside
Big Apple with Roosevelt Island Tram inside
Ring with Roosevelt Island Tram
Roosevelt Island Möbius Bracelet with Roosevelt Island Tram
Geocube with Roosevelt Island Tram inside
the beautiful Roosevelt Island to Manhattan; and, my 70th Anniversary; I had my ears
pierced – to wear my 3d Printed Genuine Sterling Silver Earrings – for this occasion :-)
See "Le tramway de Roosevelt Island reprend du service."
See my other Roosevelt Island Tram designs here:
Slice of Big Apple with Roosevelt Island Tram
The New Roosevelt Island Tram Cuff-Links
The New Roosevelt Island Tram / Pendant / Keyring
Pendant / Keyring with Roosevelt Island Tram
Keyring with Roosevelt Island Tram
Soccer Ball with Roosevelt Island Tram inside
Big Apple with Roosevelt Island Tram inside
Ring with Roosevelt Island Tram
Roosevelt Island Möbius Bracelet with Roosevelt Island Tram
Geocube with Roosevelt Island Tram inside
by
RubenAlexander
I've made a few changes to make the cooker easier to use. I've updated the handle and made the bottom flat so anyone could eat from it. I've added an extrusion near on the handle to stabilize the cooker in the base. Version 1 was very nice looking, and version 2 will keep most of the original design
while adding stability.
It will be fun to collect every color of ceramic shapeways makes. So far I have white ceramic, avocado green, and glossy black with the other colors on their way. If you are looking to get just the cooker, here's the link.
If you want to customize this in any way please email me on shapeways or contact me via my facebook page: https://www.facebook.com/ZeroDistanceDesigns
This little cooker is designed around the lowly tealight. First meals have been with a standard tealight (38mm x 38mm x 16mm) as the heat source and safflower oil inside the cooking vessel with minced green tomatoes, Portuguese sausage, and sliced garlic. After those tasty results, I progressed to make a variety of dishes.
Tiny Dishes + other savory treats:
- roasted garlic
- cheese frying: ale cheddar, mozzerella
- melted milk chocolate
- fried bread dough
- baked a small spice cake ball
- melted marshmellow + milk chocolate for different smores variations.
other neat applications:
- Heats soy wax to 200 (need to blow out the candle at 185F) and made soy candles.
temperatures:
- heats water: 200F
- heats safflower oil: 300F
limitations:
- uneven heating causes glaze cracks. The latest design with a flattened bottom seems to prevent cracks, but the base can still get glaze cracks.
other oil tests:
- coconut oil, grapeseed oil, butter were all tested and work well.
- walnut oil was tested and I don't recommend it as the oil spattered a few feet in the air as it heated up.
It will be fun to collect every color of ceramic shapeways makes. So far I have white ceramic, avocado green, and glossy black with the other colors on their way. If you are looking to get just the cooker, here's the link.
If you want to customize this in any way please email me on shapeways or contact me via my facebook page: https://www.facebook.com/ZeroDistanceDesigns
This little cooker is designed around the lowly tealight. First meals have been with a standard tealight (38mm x 38mm x 16mm) as the heat source and safflower oil inside the cooking vessel with minced green tomatoes, Portuguese sausage, and sliced garlic. After those tasty results, I progressed to make a variety of dishes.
Tiny Dishes + other savory treats:
- roasted garlic
- cheese frying: ale cheddar, mozzerella
- melted milk chocolate
- fried bread dough
- baked a small spice cake ball
- melted marshmellow + milk chocolate for different smores variations.
other neat applications:
- Heats soy wax to 200 (need to blow out the candle at 185F) and made soy candles.
temperatures:
- heats water: 200F
- heats safflower oil: 300F
limitations:
- uneven heating causes glaze cracks. The latest design with a flattened bottom seems to prevent cracks, but the base can still get glaze cracks.
other oil tests:
- coconut oil, grapeseed oil, butter were all tested and work well.
- walnut oil was tested and I don't recommend it as the oil spattered a few feet in the air as it heated up.
by
kspaho
The one above is printed in stainless. This ring is size 12, which is 21.4mm in diameter. For more sizes, please contact me direct: kspaho172@g.rwu.edu
by
SheilaMunro
This pendant is known as a ‘Dharmachakra’ or "Wheel of Life", represents • Right beliefs • Right aspirations • Right speech • Right conduct • Right livelihood • Right effort • Right mindfulness • Right meditational attainment. This pendant is approximately 1.5 inches wide.
by
Luma3Dprint
This is my 1/20th scale model of my 2012 Fusionweld Chopper design. The wheelbase of this bike model is 85mm.
by
Youknowwho4eva
Came out wonderfully in stainless. Hopefully it will still be printable in stainless. For fans of the Die, you can now have a poster of it, a card of it, even a framed print! http://www.redbubble.com/mybubble/art/6653994-2-stainless-and-gold-plated-steampunk-dice/edit
I see this has been selling well lately! Please let me know what you think of the dice, and let me know how you found them! Also if you read this you can get the link to 2 packs for a little bit of a discount. Small dice 2 pack http://shpws.me/lUWS Large dice 2 pack http://shpws.me/lUWU and variety pack http://shpws.me/lUWT
I see this has been selling well lately! Please let me know what you think of the dice, and let me know how you found them! Also if you read this you can get the link to 2 packs for a little bit of a discount. Small dice 2 pack http://shpws.me/lUWS Large dice 2 pack http://shpws.me/lUWU and variety pack http://shpws.me/lUWT
by
MichaelMueller
A buckle for all named Michael, Melissa, Malcom, Monique, Manfred, Margaret, Marcy ...
The good thing, it works for Wiliam, Wendy, Walter ... too.
If you are a fan of the letter "M", this one is your thing!
It comes without belt and metal strap!
I used an old bicycle-spoke for the strap. This works pretty well but keep in mind, that you have to do this on your own.
If there is a need for a fixed strap that is part of the buckle, please let me know.
The good thing, it works for Wiliam, Wendy, Walter ... too.
If you are a fan of the letter "M", this one is your thing!
It comes without belt and metal strap!
I used an old bicycle-spoke for the strap. This works pretty well but keep in mind, that you have to do this on your own.
If there is a need for a fixed strap that is part of the buckle, please let me know.
by
Magic
It's a small coffee cup whose handle is a moebius strip.
It is only attached on one side (where it is horizontal): I guess such a shape should be difficult to do without 3D-printing.
Oddly enough, it is quite ergonomic: put your thumb on the vertical part of the moebius strip, put the opposite horizontal part between your index and your medium, et voilà!
It is only attached on one side (where it is horizontal): I guess such a shape should be difficult to do without 3D-printing.
Oddly enough, it is quite ergonomic: put your thumb on the vertical part of the moebius strip, put the opposite horizontal part between your index and your medium, et voilà!
by
opresco
The die's faces are supported by springs meeting in its center.
Printed and tested OK
Copyright ©2011 Ovidiu Opresco
Printed and tested OK
Copyright ©2011 Ovidiu Opresco
by
WelshDesigns
Inspired from the classic Möbius Strip, this design has a small "snake" that travels the path along the outside, then inside, and back again, helping illustrate the concept. The inside diameter is about 2.7 inches. Go view a video I made of the test section I just received in Stainless Steel. http://www.youtube.com/watch?v=vIEXeOSeG-8 There is a modification I need to make before it will work in steel, but the other materials should print just fine. the way the steel is finished ended up sort of welding the snake to the bracelet! :)
Please note, there is a larger version in my shop now too. The large is about 3.0 in inside diameter.
Please note, there is a larger version in my shop now too. The large is about 3.0 in inside diameter.
by
LincolnK
It works! The little "meat ball" moves around inside this, and makes a bit of a jingle sound when you play with the piece.
This is the first in my "Spaghetti With Meat Ball" series. The "meat ball" rolls around inside the pendant making it rather fun to play with while wearing it.
It is about 1.5 inches wide.
To make it more consistent in manufacturing, the metal ball (meat ball) will need to be installed. All you do to install the ball, is push the spaghetti a bit, and pop the ball in the gap. You can also put in any 6 or 7mm ball.
A ball bearing, bead, etc. can go into it. In fact, you can put in a bunch of them if you like. It looks really cool with 13 ball bearings. That's the most you can fit into it.
This is the first in my "Spaghetti With Meat Ball" series. The "meat ball" rolls around inside the pendant making it rather fun to play with while wearing it.
It is about 1.5 inches wide.
To make it more consistent in manufacturing, the metal ball (meat ball) will need to be installed. All you do to install the ball, is push the spaghetti a bit, and pop the ball in the gap. You can also put in any 6 or 7mm ball.
A ball bearing, bead, etc. can go into it. In fact, you can put in a bunch of them if you like. It looks really cool with 13 ball bearings. That's the most you can fit into it.
by
stop4stuff
I call this pendant simply - '69'
Partially inspired by my previous pendant Twin Rail Mobius, '69' is a set of four rails arranged in a figure 8 to make a train of balls travel in seemingly never ending 6 and 9 shapes.
Note: shell only is 3D printed, add your own 6mm or 1/4in balls!
If the balls stick, use just one ball to find the sticky spot and adjust the rails physically either with pliers or a screwdriver - doing so is at your own risk, so please blame no-one but yourself if injury is caused.
by
cezarrpopescu
15 mm ENGAGEMENT RING
If you need another size, feel free to contact me and I'll upload it as soon as possible.
If you need another size, feel free to contact me and I'll upload it as soon as possible.
by
virtox
Member of the Evolutionary family.
A twin-shell model with two female sides.
Free shipping worldwide !
http://www.shapeways.com/shops/virtox§ion=Evolutionary
A twin-shell model with two female sides.
Free shipping worldwide !
http://www.shapeways.com/shops/virtox§ion=Evolutionary
by
opresco
The die's faces are supported by springs meeting in its center.
Printed and tested OK
Copyright ©2011 Ovidiu Opresco
Based upon the geometry of the Rhombic Triacontahedron
Printed and tested OK
Copyright ©2011 Ovidiu Opresco
Based upon the geometry of the Rhombic Triacontahedron
by
Youknowwho4eva
This version of the Acoustabowl was specifically designed for Ceramic, but is available in all printable materials. The Acoustabowl is designed to hold any current phone, even the very large Samsung Note. It has been tested with the Samsung SII Skyrocket, Samsung SIII (speaker is towards the top of phone, so phone must be upsidedown), and the Apple iPhone 3GS. Put your phone in, play a song or video, and enjoy the enhanced acoustics of the Acoustabowl.
