by
nakamura_shop
-Default size is D.18mm (finger diameter)
- Assassin's ring the size is adaptable because the ring is flexible
- now the model is a Co-creator
- Suggest for all... if you want enlarge the ring you have to flex the wings,not the Assassin symbol
by
90grad@gmx.ch
Bracelet based on branching pattern.
Default diameter is 65 mm (various sizes available).
Also available as ring.. Please contact us
Updated Geometry/ Issues fixed
Default diameter is 65 mm (various sizes available).
Also available as ring.. Please contact us
Updated Geometry/ Issues fixed
by
90grad@gmx.ch
Bracelet based on branching pattern.
Default diameter is 65 mm (various sizes available).
Also available as ring.. Please contact us
Updated Geometry/ Issues fixed
Default diameter is 65 mm (various sizes available).
Also available as ring.. Please contact us
Updated Geometry/ Issues fixed
by
Egant
When is the last time there has been an innovation in buttons? Answer, just now! This button not only holds your shirt together, but it also holds the cord for your ear buds and helps to keep them in your ears. Works for apple ear buds, and any cords with a 2 mm diameter.
by
JoshuaHarker
love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.
by
JoshuaHarker
love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.
by
harryapeman
UPDATE: Click this link to see the new version with loops for easy addition of a necklace chain! *Chain NOT included*
Makes a great Valentine's Day gift!!
They balance nicely on the top to fingers. With some dexterity they can also be fashioned into a necklace.
Makes a great Valentine's Day gift!!
They balance nicely on the top to fingers. With some dexterity they can also be fashioned into a necklace.
by
kspaho
Yes I did go there. After talking to Christopher Carter from Shapeways, he made me realize the power of the Meme. So here you have it, the mightly anteater who doesn't give a damn. Don't forget to check out ((F U I'm Anta Claus)) and the ((honey badger))
by
mkassner
This is the PUPIL eye-tracking headset. It is part of the PUPIL project on code.google.com/p/pupil. This is the second tested public release of the hardware. Revision 012.
(As material we have tested all SLS-nylon versions from shapeways - they call it strong and flexible. We recommend white polished or black.
by
barbecuesteve
This adapter holds your Apple "MagSafe to MagSafe 2 Adapter" snugly and hooks to your power adapter's cord. For that power adapter that is used to serve both old and new Macs!
by
virtox
The original Eardrops
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
by
virtox
The original Eardrops
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!
I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!
More earrings
by
MichielCornelissen
The Wrap - cable winder accessory for European iPhone charger
If you are from Europe and have a recent iPhone, you will probably recognize the charger shown here. You may also have noticed that you can almost wind your USB cable around it - but not quite, frequently resulting in pocket spaghetti.
I realized that one end of the charger is already perfectly fit for the job, and all you really need is the same shape on the other side as well. The Wrap provides just that, clipping securely onto the USB plug.
The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Works with recent European iPhone chargers and USB cables as shown in the images, up to iPhone 4 and 4S - please check before you purchase. Does not work with iPhone 5 cables. To save on shipping costs, you may want to consider buying two or more; you know your friends will love you for it. Product is shipped in basic Shapeways packaging. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off.
You can have a look at all the products in my shop here. If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com, or contact service@shapeways.com. If you like, follow me on twitter.
By popular demand, a US version of The Wrap is now available here.
A wholesale offer of 5 units of The (European) Wrap at reduced prices is now available here.
If you are from Europe and have a recent iPhone, you will probably recognize the charger shown here. You may also have noticed that you can almost wind your USB cable around it - but not quite, frequently resulting in pocket spaghetti.
I realized that one end of the charger is already perfectly fit for the job, and all you really need is the same shape on the other side as well. The Wrap provides just that, clipping securely onto the USB plug.
The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Works with recent European iPhone chargers and USB cables as shown in the images, up to iPhone 4 and 4S - please check before you purchase. Does not work with iPhone 5 cables. To save on shipping costs, you may want to consider buying two or more; you know your friends will love you for it. Product is shipped in basic Shapeways packaging. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off.
You can have a look at all the products in my shop here. If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com, or contact service@shapeways.com. If you like, follow me on twitter.
By popular demand, a US version of The Wrap is now available here.
A wholesale offer of 5 units of The (European) Wrap at reduced prices is now available here.
by
virtox
Phamora Ceramics!
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
by
virtox
A triply model, composed of three interlocked but separate matrices, which is nearly impossible to make without 3d printing!
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).
Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.
Big available here: here it is.
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).
Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.
Big available here: here it is.
by
Drawn-SteelHero
Detailed sniper assault rifle with flip-down bipod converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours .
Assembly and conversion instructions available HERE.
Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours .
Assembly and conversion instructions available HERE.
by
Drawn-SteelHero
Detailed sniper assault rifle with flip-down bipod converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours .
Assembly and conversion instructions available HERE.
Gun mode comes with a choice of three handles, any one of which can be fit onto the figure during assembly (and since they are attached via a simple clip-in hinge, you can keep the others handy and swap them later if you choose). Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Options 2 and 3 are modified versions of the post, which can still be used by figures with 5mm peg holes, but also have built-in clips which allow them to clip onto any 3mm diameter rail. One version has the opening of the clip positioned parallel to the length of the gun, the other perpendicular.
Supplied as a 18-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours .
Assembly and conversion instructions available HERE.
by
bophoto
arDrone 2.0 bracket for GoPro 1 & 2 cameras
NOT COMPATIBLE with GoPro HERO3 - New design will be available shortly.
NEW click here for GoPro Hero3 mount for arDrone 2
This is 5 parts which must be cut appart before installation.
Instructions for installing the mount on your arDrone https://vimeo.com/55233318
EDIT - just added the extender to this product, it is two parts, put foam between them to lower the camera and further reduce vibrations.
I have some video on Vimeo, this was shot in WINDY conditions and look pretty bad, but you get the idea, as soon as the weather in LA improves for flying small copters, I will be updating the video. www.vimeo.com/41468132
GoPro Hero2 - I recommend cutting a disc of Lee Filter 9ND-P3 and sticking it under the glass on the protective cover as that will reduce the shutter speed and practically eliminate jello.
GoPro Hero1 - have slower shutterspeed and don't suffer as much from jello as hero2, but you can also use ND film to further reduce jello if required.
All kinds of precautions apply to this product, Im not responsible for your flying of this. or what you may do to your arDrone or GoPro camera... if somebody print this in red, do send me some pictures.
NOTES on getting beautiful video with arDrone-GoPro combinations. First, you MUST understand that even the arDrone 2.0 is under powered for wild flying. to stay in the air it must use power to force air down.. when you hang a GoPro under it, the battery empty faster because it use more power.
NEXT, understand moving, happens by the drone tilting, so it essentially is "sliding down a hill" by being at a angle.. so now to keep the same altitude the motor must work even harder.
Combining the sliding down a hill motion and the weight of the GoPro, means you are operating at the limit of what is possible with a arDrone. as a result the props and motors work hard creating lots of vibrations and shaking.
The solution is flying EARLY in the morning, when the air is cool and there is absolutely no wind or even a breeze, in completely still air, the arDrone do not need to compensate for wind and will fly much more stable and smoothly, and the motors will have less work to do, resulting in less vibrations. Early morning flights is key to getting amazing beautiful video from a GoPro mounted under a arDrone. There.. NOW you know. Happy Flying.
This sale include all parts required to mount you GoPro, arms and the adjustable cradle, it do NOT include arDrone, GoPro, GoPro protective lens.
NOT COMPATIBLE with GoPro HERO3 - New design will be available shortly.
NEW click here for GoPro Hero3 mount for arDrone 2
This is 5 parts which must be cut appart before installation.
Instructions for installing the mount on your arDrone https://vimeo.com/55233318
EDIT - just added the extender to this product, it is two parts, put foam between them to lower the camera and further reduce vibrations.
I have some video on Vimeo, this was shot in WINDY conditions and look pretty bad, but you get the idea, as soon as the weather in LA improves for flying small copters, I will be updating the video. www.vimeo.com/41468132
GoPro Hero2 - I recommend cutting a disc of Lee Filter 9ND-P3 and sticking it under the glass on the protective cover as that will reduce the shutter speed and practically eliminate jello.
GoPro Hero1 - have slower shutterspeed and don't suffer as much from jello as hero2, but you can also use ND film to further reduce jello if required.
All kinds of precautions apply to this product, Im not responsible for your flying of this. or what you may do to your arDrone or GoPro camera... if somebody print this in red, do send me some pictures.
NOTES on getting beautiful video with arDrone-GoPro combinations. First, you MUST understand that even the arDrone 2.0 is under powered for wild flying. to stay in the air it must use power to force air down.. when you hang a GoPro under it, the battery empty faster because it use more power.
NEXT, understand moving, happens by the drone tilting, so it essentially is "sliding down a hill" by being at a angle.. so now to keep the same altitude the motor must work even harder.
Combining the sliding down a hill motion and the weight of the GoPro, means you are operating at the limit of what is possible with a arDrone. as a result the props and motors work hard creating lots of vibrations and shaking.
The solution is flying EARLY in the morning, when the air is cool and there is absolutely no wind or even a breeze, in completely still air, the arDrone do not need to compensate for wind and will fly much more stable and smoothly, and the motors will have less work to do, resulting in less vibrations. Early morning flights is key to getting amazing beautiful video from a GoPro mounted under a arDrone. There.. NOW you know. Happy Flying.
This sale include all parts required to mount you GoPro, arms and the adjustable cradle, it do NOT include arDrone, GoPro, GoPro protective lens.
by
curvecreative
Bugle for iPhone 4 / 4S
Enjoy your music louder with the Bugle
The Bugle is a natural acoustic amplifier for your iPhone that fits snuggly over the speaker, acts as a stand and makes your music sound better and louder. The Bugle is curved to provide a natural flex that assures a snug fit on your iPhone.
A great solution for bringing anywhere and requires no batteries. Just chuck it in your bag and use it for music at the park, for watching a film, or for sharing a youtube video
iPhone 5 version available here
by
virtox
A matching pair of earrings, resembling small twigs.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
by
virtox
A matching pair of earrings, resembling small twigs.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
Absolutely stunning in the new Premium Silver!
These are actual photos!
Also wonderful in the other metal finished.
For example, the steel printing process adds an almost natural texture to the twigs.
Which also works very well in bronze or gold finishes!
More earrings
Silver earring hooks included, courtesy of Shapeways!
One twig is approximately 30x19x7mm.
by
thehiddenice
Each badge is about 1.25 x 1.25 x .25. If anyone is interested in Individual badges, let me know and I'll upload them separately.
More badges to come.
by
boustalahit
This figurine is a fan art inspired by the great game "Day of the Tentacles" back in the nineties. This one is the nice and gentle green tentacle, who like to play guitar (but he doesn't have arms... HOW DOES HE DO ?)
I really recommand you the game if you find it somewhere (it's a collector now).
Please note that I don't do any markup on the price. I'd love your comment on your order too :)
by
admiralducksauce
Squad of vicious Frogan warriors in 28mm scale.
by
arthurditlef
ARTIFICIAL NATURE SERIES
Inspired by Nature, with an artificial twist.
Inspired by Nature, with an artificial twist.
by
joabaldwin
Low polygon Cloud Strife from Final Fantasy 7. I modeled him identical to the original low poly you see in the FF7 videogame (not the cutscenes version or fights version, but the playable, big headed one you actually control).
#####This is NOT an official model by Square Enix#####
I just made it myself since I couldn't find official merchandise with the low poly character.
The 3d print looks great, though the hair isn't as spiky as it should be, since color printing can't do such sharp points.
#####This is NOT an official model by Square Enix#####
I just made it myself since I couldn't find official merchandise with the low poly character.
The 3d print looks great, though the hair isn't as spiky as it should be, since color printing can't do such sharp points.
by
arthurditlef
Now you can bring home 3D Printing in style.
3D Photo Frame
is manufactured in strong and flexible polyamide, using SLS (or Selective Laser Sintering) 3D printing technology. That's right, each 3D Photo Frame is produced in a machine by printing a digital file layer by layer into a physical object especially for you. This unique manufacturing process makes possible to create the 3D Photo Frame in a single piece without the need to assemble. It also enables to produce the 3D Photo Frame in demand, so it is manufactured only when you buy it and delivered directly to your home. It is made to support photo size 102x152 mm (4x6 inches).
Colors
are always available in white and black, plus Shapeways seasonal colors.
* Due the material's flexibility, it is advised to use 2 support points in each end, rather than 1 in the middle to keep the straight line look
3D Photo Frame
is manufactured in strong and flexible polyamide, using SLS (or Selective Laser Sintering) 3D printing technology. That's right, each 3D Photo Frame is produced in a machine by printing a digital file layer by layer into a physical object especially for you. This unique manufacturing process makes possible to create the 3D Photo Frame in a single piece without the need to assemble. It also enables to produce the 3D Photo Frame in demand, so it is manufactured only when you buy it and delivered directly to your home. It is made to support photo size 102x152 mm (4x6 inches).
Colors
are always available in white and black, plus Shapeways seasonal colors.
* Due the material's flexibility, it is advised to use 2 support points in each end, rather than 1 in the middle to keep the straight line look
by
GADesign
This beautiful pendant design has both inner and outer spirals, and together they represent the shape of a teardrop filled with DNA.
Premium Silver gives it more shine to make it even more beautiful !
This product has been successfully printed in all materials availible.
Premium Silver gives it more shine to make it even more beautiful !
This product has been successfully printed in all materials availible.
by
coines23
A long-range fire support mecha. This 2-piece model is 2.8cm tall when assembled.
by
Vidalcris
Cheaper smaller version without gun :
Day of the Tentacle, also known as Maniac Mansion II is a 1993 epic graphic adventure game developed and published by LucasArts.
Purple Tentacle, one of the crazy Dr. Fred's creations, drinks contaminated water from Dr. Fred's Sludge-o-matic. He mutates into an insane genius and grows arms, and now he's plotting to take over the world.
Look at my shop i got so many models !
Day of the Tentacle, also known as Maniac Mansion II is a 1993 epic graphic adventure game developed and published by LucasArts.
Purple Tentacle, one of the crazy Dr. Fred's creations, drinks contaminated water from Dr. Fred's Sludge-o-matic. He mutates into an insane genius and grows arms, and now he's plotting to take over the world.
Look at my shop i got so many models !
by
ArnaudCouturier
Put it with your keys on a key ring,
hang it on a chain / rope,
or lay it on a flat surface.
The hole for the chain / ring is 4.5 mm wide in diameter.
To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.
Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.
Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.
hang it on a chain / rope,
or lay it on a flat surface.
The hole for the chain / ring is 4.5 mm wide in diameter.
To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.
Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.
Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.
by
ArnaudCouturier
Put it with your keys on a key ring,
hang it on a chain / rope,
or lay it on a flat surface.
The hole for the chain / ring is 4.5 mm wide in diameter.
To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.
Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.
Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.
hang it on a chain / rope,
or lay it on a flat surface.
The hole for the chain / ring is 4.5 mm wide in diameter.
To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.
Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.
Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.
