by
MichielCornelissen
Important notice: a lot of people have been very happy with this product, but, as can be read in some of the comments below, it's clear that this design is right on the edge of what Shapeways can produce to the right quality at this moment. If you buy it, there's a risk of having a less then perfect fit, colors can be different from what you see on the screen, and, depending on how you use your phone as well as the tolerances of the case, it has been reported that the polyamide material can give a sort of polishing/scratching effect on the metal rim of the phone (you can find descriptions online of how to remove these kind of blemishes, but it may still be annoying).
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
Essential protection for iPhone 4S and iPhone 4
Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.
This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.
4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.
A two pack of 4-4's in the same color is available at reduced prices here.
You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.
If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
Essential protection for iPhone 4S and iPhone 4
Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.
This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.
4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.
A two pack of 4-4's in the same color is available at reduced prices here.
You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.
If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.
by
bitstoatoms
Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12
The Skull Ring by Bits to Atoms is 3D printed in stainless steel with a tessellated and slightly pitted texture. A masculine piece that works just as well with denim jeans and a t-shirt as it does with a 3 piece suit (or formal dress).Please contact for bespoke sizing.
by
MichielCornelissen
The Wrap - cable winder accessory for European iPhone charger
If you are from Europe and have a recent iPhone, you will probably recognize the charger shown here. You may also have noticed that you can almost wind your USB cable around it - but not quite, frequently resulting in pocket spaghetti.
I realized that one end of the charger is already perfectly fit for the job, and all you really need is the same shape on the other side as well. The Wrap provides just that, clipping securely onto the USB plug.
The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Works with recent European iPhone chargers and USB cables as shown in the images, up to iPhone 4 and 4S - please check before you purchase. Does not work with iPhone 5 cables. To save on shipping costs, you may want to consider buying two or more; you know your friends will love you for it. Product is shipped in basic Shapeways packaging. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off.
You can have a look at all the products in my shop here. If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com, or contact service@shapeways.com. If you like, follow me on twitter.
By popular demand, a US version of The Wrap is now available here.
A wholesale offer of 5 units of The (European) Wrap at reduced prices is now available here.
If you are from Europe and have a recent iPhone, you will probably recognize the charger shown here. You may also have noticed that you can almost wind your USB cable around it - but not quite, frequently resulting in pocket spaghetti.
I realized that one end of the charger is already perfectly fit for the job, and all you really need is the same shape on the other side as well. The Wrap provides just that, clipping securely onto the USB plug.
The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Works with recent European iPhone chargers and USB cables as shown in the images, up to iPhone 4 and 4S - please check before you purchase. Does not work with iPhone 5 cables. To save on shipping costs, you may want to consider buying two or more; you know your friends will love you for it. Product is shipped in basic Shapeways packaging. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off.
You can have a look at all the products in my shop here. If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com, or contact service@shapeways.com. If you like, follow me on twitter.
By popular demand, a US version of The Wrap is now available here.
A wholesale offer of 5 units of The (European) Wrap at reduced prices is now available here.
