cwcs2010Hello, 'KokodaTrailModels'.
Can You make a new 1/700 BTR-80 Models based on your BTR-4's ?
Your present BTR-80 Models have a slight flaw that most front end of your BTR-80's wheel is in front of your BTR-80's driver's seat.
This is same to all the other of your BTR-80 based vehicle models such as BTR-82A and 2S23 Nona SVK, except the BTR-4 varionts.
So I think if you make a 'new' 1/700 scale BTR-80 and it's variation vehicle model based on your already made 'BTR-4' would be very thankfull.
Please give me your replies to me. I will happly wait your answers.
KokodaTrailModels@JeffyB Good to hear you like them. Let me know which ones specifically you'd like to see in 1/600, as there's probably too many for me to make in that scale in one go.
KokodaTrailModels@Dioramaman
Hi Dioramaman, Agreed, making WSF smooth is nearly impossible, especially for models with fine parts like periscopes, or ordinance on an aircraft. I'd recommend Frosted plastic, except for the massive price difference.
WSF is good for objects that don't require a smooth surface, like stealth aircraft, or buildings.
KokodaTrailModels@rebelmodel
Unfortunately the RAH-66 is too small to print in scales below about 1/72 without making the parts too chunky, and in a scale as large as that Shapeways would charge about a million bucks to print it.
KokodaTrailModels Hi rebelmodel,
The price would end up the same as they would need extra plastic to joint the 16 together.
KokodaTrailModels Hi KingKaddish,
Thanks for you interest in my models.
Unfortunately all my models are designed in 1/700 with the smallest allowable print sizes. That means that quite a few parts, like landing gear, or detail on a fuselage are at the threshold of what can be printed (0.1mm - 0.5mm).
Making a model smaller than 1/700 (ie 1/1400) is impossible, and due to time constraints a redesign is also not possible.
Cheers,
Jeremy
KTM
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: