by
virtox
Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Now give it a good spin or puff of air and it erupts in erratic and wild behavior.
This is the 5cm / 2" version, see the Gyro the Forms section for other shapes and sizes.
Corner stand available separately, or get the complete set below!
NEW!
Now also available as a pendant/keyfob!
In both Extra small and Small
Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !
Notes
Do not be alarmed if your cube will not run smoothly at first!
Because of minor variations as a result of the printing process,
some need to wear in a little but will loosen up very quickly.
In the example video I am blowing on it to make it move, it's that smooth.
Be a little careful with (the assembly of) the Alumide version as this material is slightly less flexible/robust than the Strong & Flexible materials.
Get a complete set.
A default set consists of an Alumide Gyro the Cube and a White stand, you can change the materials in your cart later.
+ 
by
stefdevos
This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.
by
virtox
Cubichain bracelet (for custom sizes)
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
Ammnra
Larger, Hollow Pendant based on Assassin's Creed Apple of Eden
3mm Hole thru center for your own chain/necklace
Parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
3mm Hole thru center for your own chain/necklace
Parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
ZeusRage
Cool android hand that can be used as a paper weight or as an epic desktop item.
by
vertigopolka
Here is a cubic interpretation of the classic trefoil torus knot.
There are also 50mm and 1-inch versions of this shape without the hanging loop.
Check out additional models of knots and torus knots in my Knots section, and see more of my pendants in my Pendants section.
There are also 50mm and 1-inch versions of this shape without the hanging loop.
Check out additional models of knots and torus knots in my Knots section, and see more of my pendants in my Pendants section.
by
designerica
This two-finger ring is unlike any other piece of jewelry you've ever seen. When you're wearing it, it appears as if there are three graduated moons nestled between your four fingers. In fact, the ring only goes around your middle and ring fingers.
The piece is 3D printed in stainless steel and infused with bronze for strength. The bronze doesn't show- the metal is white in color and very strong. The ring is just flexible enough so that you can bend it to fit the curve of your fingers. The balls won't deform.
The ring shown is a double size 7 but can be made in any sizes using the co-creator!
For the less daring, Single and Double Moonball rings are also available.
The piece is 3D printed in stainless steel and infused with bronze for strength. The bronze doesn't show- the metal is white in color and very strong. The ring is just flexible enough so that you can bend it to fit the curve of your fingers. The balls won't deform.
The ring shown is a double size 7 but can be made in any sizes using the co-creator!
For the less daring, Single and Double Moonball rings are also available.
by
Emm@nuel
This one was very difficult to achieve. It is composed of 12 independent and entangled parts.
by
byShapeways
A plate which can be attached to your keychain with a braille message. The text can contain up to 22 characters.
by
vertigopolka
This is my 3D printed 36-inch chain strap (with octahedron links), which can be ordered as an accessory for one of my mesh bags or purses. Also available in a 45-inch version: 45-inch chain strap. You can view all of my 3D printed bags and purses here: VertigoPolka - Bags and Purses
by
GothamSmith
This version of our anchor lacks the crossbar, so it's more comfortable, though less historically accurate. If you're not stopping boats, you'll be stopping heads.
This product ships without a chain.
by
HenryAlfredo
The rendition of salaam in square kufic style arabic defines this pendant. It means peace. Something we could use a bit more every day.
by
TravisRoske
A bike chain necklace
Aprox 20" circumference
