Click and drag to rotate
Yota44 Evo3 3d printed

DIGITAL PREVIEW
Not a Photo

Black Natural Versatile Plastic
Yota44 Evo3  3d printed
Yota44 Evo3  3d printed

DIGITAL PREVIEW
Not a Photo

Yota44 Evo3

Made by
$19.00
3D printed in black nylon plastic with a matte finish and slight grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This axle housing is used to upgrade the RC4WD Yota 2 axles to RC4WD D44 C-hubs and Knuckles and get above 45 degrees of steering - on your leaf sprung truck!


You will need a donor  RC4WD Yota 2 axle and some parts of a D44 axle:
Yota2 parts:
3rd member
https://store.rc4wd.com/Replacement-Third-Member-for-Cast-Yota-II-Axle_p_2925.html
differential gears, bearings
https://store.rc4wd.com/Helical-Gear-Set-for-110-Yota-Axle_p_2828.html
Diff cover (every yota2 compatible cover)
https://store.rc4wd.com/Replacement-Diff-Cover-for-Cast-Yota-II-Axle_p_2926.html
bearings for differential and pinion 
3rd member screws

D44 (plastic version) parts:
C-hubs
https://store.rc4wd.com/D44-Aluminum-C-Hub-for-Plastic-D44-Axles_p_5418.html
Knuckles (plastic or aluminum)
https://store.rc4wd.com/D44-Steering-Knuckles_p_3251.html
VVDs in Wraith length 
https://store.rc4wd.com/XVD-Shafts-for-D44-Wide-Front-Axle-Wraith-Width_p_3990.html
bearings and bushings for the knuckles

With this axle the width is the same as with stock Yota 2 axles. Due to the narrow leaf spring mounts you get better steering. The leaf mounts are exactly 14mm narrower than on a stock Yota2 axle.
The mods on the frame side for narrower leaf springs can be seen here:
http://rccrawler.at/index.php?thread/6065-bauertom-daniels-baut-special-k-jeep-tf2-swb-2-0-mit-k44-simpel-und-schnell/
The design also allows to put the pumpkin on the side you want.
The XVDs have to be cut and flattened for the right length!
The shocks can be mounted with parts from a RC4WD 4link kit or custom made parts.


If you have any questions fee free to ask!

EVO3 Updates:
  • Space for 5x8x2.5 mm bearings in the C-hub
  • recesses to use the stock differential cover when flipping the axle (previously you needed to use the ARB cover or drill those recesses yourself) 

Deutsch:
Mit dieser Achse kann man seine RC4WD Trialfinder 2 (yota 2) Achse auf mehr als 45 Grad Lenkeinschlag und mehr Standfestigkeit aufrüsten. Die Achse sieht dann nimmer noch recht schlank aus, hat es jedoch ordentlich in sich.
Dazu verwendet man Differentialzahnräder, 3rd Member und Differentialdeckel von der Trialfinder Achse und Knuckles, C-Hubs und Antriebswellen von der RC4WD D44 Achse. 
Durch die schmäleren Montagepunkte für die Blattfedern kann man den vollen Lenkeinschlag ausnutzen. Hierfür muss man die Blattfedern am Rahmen genau um eine Blattfedernbreite weiter innen montieren.
Bei Fragen stehe ich gerne mit Bildern bereit.

working title s-yotawidth-14minusleaf-s-offset-evo3
Details
What's in the box:
s-yotawidth-14minusleaf-s-offset-evo3
Dimensions:
11.12 x 1.8 x 3.5 cm
Switch to inches
4.38 x 0.71 x 1.38 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Sign In or Join to comment.
 
 
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.