Like squonking? Hate refliiling every day or so, changing batteries several times a day? Well, I've got a solution for that!
The MEGA is made to use a 26650 battery, and with a wireless charger, you'll never need a USB wire again.
With a 15ml bottle that you've probably already got, you'll have more than enough juice to forget you need to refill it!!
The benefits don't just top there. With smaller squonkers you need to buy smaller bottle, bottles no one ever has, or like the V2 are only sold online. With this, you use the same bottle you most likely got when you bought your juice. Just discard the empty and screw on a new one!
To build this you will need this body and:
- Either a 2.1 or 3.1 bezel and the bezel lock plate http://www.shapeways.com/product/7UGKX776K/?key=fbff855f5b3dbe1a485362a845c2d3e9, or one of the MEGA's 1pc bezels. *and parts needed for that bezel*
- MEGA's cover http://www.shapeways.com/product/P6F4HW36G/?key=0b6e30b719444dfb0730aa3f321f50b5
- V4 22mm long BF 510 connector http://www.fatdaddyvapes.com/shop.html
BF botle Attachmenthttp://www.fatdaddyvapes.com/shop.html
6 - Brass Press-Fit Expansion Insert http://www.mcmaster.com/#94510a360/=utvxmo
6 - M2 X .4 screw http://www.mcmaster.com/#93395a141/=utqg2w
Palm pixi Charging Coil Receiver http://www.ebay.com/itm/DIY-Wireless-Charging-Coil-Receiver-for-HP-PALM-Pixi-Touchstone-/281138131354?ssPageName=ADME:X:AAQ:US:1123
Palm Pixi OEM Palm Touchstone http://www.cellularoutfitter.com/hp-palm/pixi/phone-chargers/oem-palm-touchstone-desktop-docking-station-black.html?DZID=CSE_Shopping_12818_HP/Palm_18711_2_12818&utm_source=ShoppingCA&utm_medium=CSE&CA_6C15C=120153940001749336
15 ml dripper bottle like this http://www.totalpharmacysupply.com/prodimg/7622.jpg
The following are optional parts.
- 2 - 3/16 X 1/4 magnets http://www.kjmagnetics.com/proddetail.asp?prod=D34-N52&cat=168
- 2 - 3/16 X 1/8 magnets http://www.kjmagnetics.com/proddetail.asp?prod=D32-N52&cat=168
XT30 plug http://www.hobbyking.com/hobbyking/store/__65440__XT30_Power_Connectors_for_30A_Continuous_Applications_5_Pairs_.html
- The holes for the magnets are provided incase the plastic should ever ware to the point the cover would be loose over years of use. I felt it easier to provide holes for a possible future use, than drill them (if needed) later.
- The XT30 Plugs would give you the ability to disconect the chip and bezel from the body and use it in other devices without un-soldering and re-soldering. This would give you the flexability of multi MOD's with 1 chip and charger.
If you with to have a 1pc bezel that it not offered (I only posted a few), please email me here or on Facebook and I will upload one as you wish. (the price would/should be consistant with the others).
*** I now have a home 3D printer and am able to make these at a fraction of the cost if interested. All parts I print will be fully tested for fit and quality, Please contact me on Facebook for more details.