Click and drag to rotate
CM-17 3d printed

Not a Photo

White Natural Versatile Plastic
CM-17 3d printed
CM-17 3d printed

Not a Photo


Made by
Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The product on this page, is called the (LOCK FASTENER-CM-17) and, its one part out of (20) 3-D printed parts in total, not including screws needed to begin the primary build of an original designed manually hand operating machine called the (COIL MAKER)  a visual  of  the complete built machine, is shown on my web- site  link below, clik on product tab  to view  (COIL MAKER):

Also, here a brief description of the LOCK FASTENER  which are two, that will be used to strap down  and lock in place the C-L- BRACKET and the C-R-BRACKET  HANDLE ARM, assembly  on the  two vertical TOWER BRACKET-L and TOWER BRACKET-R top end for (COIL) construction. And when (COIL) construction is completed, the two LOCK FASTENERS, can easily be unlatched for (COIL) removal.  

Further adding, the complete build of the (COIL MAKER) is when you obtain the 00 screws needed to fasten together all 3-D printed parts for the total construction of the (COIL MAKER) machine.  

Also, the instruction on how to assemble the (COIL MAKER) machine will be located on my web-site as follow: , alone with a description of other needed items needed to complete the overall assemble of the (COIL MAKER) machine.

Also, I would like to add in short, the main purpose for the (COIL MAKER) machine, is to aid the hobbyist or any person with interest with (Renewable Energy)   device construction and in need of a convenience way to make coil with magnetic wire cover with enamel for their generator of their (Renewable Energy)   project devices.

Inclosing, I would like to this time to thank you! For your contribution in being proactive in trying to help in saving the world’s environment etc. with your passion of (Renewable Energy) projects.

Attention: you must have, two of the part, shown on this page, in order to complete, the (COIL MAKER) machine build.

The list below show all the 3-D printed parts needed for complete build  

[   ] CM-1 (BASE FRAME)



[   ] CM-4-L (L-BRACE)

[   ] CM-5-R (R-BRACE)

[   ] CM-6-L (C-L-BRACKET)

[   ] CM-7-R (C-R-BRACKET)



[   ] CM-10-H (KNOB)

[   ] CM-11-H (HANDLE ARM)

[   ] CM-12-H (SPACER-B)

[   ] CM-13-H (DISK COVER)


[   ] CH-15-H (CORE SHAFT)

[   ] CH-16-H (SPACER-A)

[ X ] CH-17-H (L-FASTENER)

[   ] CH-18- (FRICTION BAR)


                                                                                                All rights reserved

What's in the box:
2.8 x 0.8 x 0.2 cm
Switch to inches
1.1 x 0.32 x 0.08 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.