1/250 SMS Emden/Dresden 5.2 cm/55 SK L/55 x8
1/250 SMS Emden/Dresden 5.2 cm/55 SK L/55 x8
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/250 Scale German 5.2 cm/55 (2.05") SK L/55 x8 for Dresden Class ships. These are highly detailed parts modelled from plans and using many reference photographs.
Details include:
Historial Information
Developed for torpedo boats of the 1900s and used as anti-torpedo boat guns on a few cruisers of the same period including SMS Dresden and SMS Emden.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended.
Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details include:
- Breech loading mechanism, hex nuts
- Sighting, Elevation mechanisms
- Barrels are printed onto sprue for stability, made for easy removal
Historial Information
Developed for torpedo boats of the 1900s and used as anti-torpedo boat guns on a few cruisers of the same period including SMS Dresden and SMS Emden.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended.
Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
250 5.2 cm:55 (2.05") SK L:55 Sprue.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
