1/800 Scale Gundam M61A5 Semovente +PE x10 Main Battle Tanks.
Contains:
- 10x Gundam M61A5 Semovente +PE Main Battle Tanks
M61A5 Semovente +PE Main Battle Tanks
The
Type 61 or
M61 main battle tank is a type of ground weapon in the anime series
Mobile Suit Gundam. It was fielded by the
Earth Federation in
U.C.0061 and saw service up until at least U.C. 0079. The Type 61 tank featured dual 150mm cannons and a 12.7mm machine gun, as well as eight smoke dispensers. There were also a wide selection of variants made for transport and troop deployment.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation