If you've been to Steamboat Springs, you know that it's off the beaten path. But you also know that this tiny town boasts a first-class ski resort and lots of snow. Situated in North-Central Colorado, far from the crowds of Vail and Breckenridge and closer to Wyoming than I-70, this rustic resort town rests in a flat valley below Mt. Werner. Steamboat Ski Resort covers the West flank of that mountain with 165 runs over 3000 skiiable acres, with a total vertical of 3668'. Our 3d printed model includes the entire resort and parts of the town, and is available in four sizes, ranging from 2.6" to 10.6" long. The color is from a satellite photo taken on a wonderfully clear March 11, 2018.
Model scale is 1:100000
Model measures 2.6" x 1.82" x 0.7" (6.7 x 4.6 x 1.77 cm)
Original area is approximately 4.2 by 2.9 miles
Altitudes covered: 6781' to 10570'
There is no vertical exaggeration applied to this model. This is a true-to-life scale model of a real place.
for more sizes.
for other 1:100000 models.
TinyMtn models are most affordable in the "Sandstone" and "White Natural Versatile Plastic" materials. This model is in "Sandstone," which is a glued gypsum material. When you receive the model it will be ready for display, though it may smell funny and need some time to air out. "Sandstone" models are much more brittle than "Versatile Plastic" models, but feel more like light stone. Do not soak it in water, though you can safely seal it with Polycrylic or a similar water-based clear spray sealant. Read more about this popular material here
All TinyMtn models have hollow bottoms - this is to save on weight, and thus cost. Many larger models also have extra flanges on their undersides to increase rigidity and strength. To make the model more solid, you should feel free to carefully pour resin into the bottom cavity, or glue a properly-sized slab of wood or another material into it.
These models have been optimized for the above materials, and are not offered in other materials for strength or cost reasons. If you need one in another material, please email@example.com
and we'll do our best to fulfill your request.
(C) 2018 TinyMtn (TM)
Model created using GDAL, NetPBM, Gmsh, Carve, MeshLab, and other custom software
Contains modified Copernicus Sentinel data from 2016
Copernicus Open Access Hub is https://scihub.copernicus.eu/dhus
Source of digital elevation data: U.S. Geological Survey
The USGS home page is http://www.usgs.gov/