You must be logged in and verified to contact the designer.
1/200 RN 12ft Stove Pipes x16, ideal for most WW2 1/200 Scale Royal Navy warship. pipes are approx 12ft high. No more fiddly, flat photo etch or scratch building nightmares!
Note: care must be taken removing pipe from base. Model is optimised for easy removal from base and supports can be be kept in place for airbrushing. Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners.
Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin. Water-based acrylic paints meant for plastics is strongly recommended.
Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics. Use dedicated model sprue cutters to remove parts to minimise damage to parts. Please take a look at my other items.