This is a kit for building a Cage scaled for smaller transformers small transformers (Battle Masters, Micromasters, Titan Masters, Prime Masters, Minicons, or similar small scale) This is inspired by the G1 Cartoon. I added some additional mechanical details. The kit has 5mm ports so it can be connected to other Transformers. There is a connection for ramps in the War for Cybertron Trilogy. The door can open and close. There is a 3mm peg on the door, compatible with Seige Blast Effects. The design is also stackable. If you purchase multiple kits, they will stack together neatly.
This will look great with Seige Hound or Earthrise Quintesson.
This is sold as a set of 6 pieces connected together.
1 Floor
1 Roof
2 Side Walls
1 rear wall
1 Door
You will need to separate the parts and cut off the excess plastic. This is a kit and will require assembly. Glue is not required but recommended for keeping the cage solid. To assemble, peg the walls and door into the floor and ceiling. One wall will have doorstops built into it. When assembling, keep the doorstops on the inside of the cage.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
For the Straight adapter, please see my other product here:
https://www.shapeways.com/product/H4R9M56QT/tf-titans-return-to-earthrise-ramp-adapter?optionId=153743490&li=shops
For the Hex adapter, please see my other product here:
https://www.shapeways.com/product/PHB4V4JWV/tf-earthrise-hex-ramp-adapter
For the long ramp adapter, visit my other design here:
https://www.shapeways.com/product/3F8FK6XWJ/tf-seige-earthrise-long-ramp
For the Quintesson weapon set, visit my other design here:
https://www.shapeways.com/product/KDS78ZVN5/tf-earthrise-quintesson-gun-4-pack?optionId=208707206&li=shops