You must be logged in and verified to contact the designer.
A set of 9 65 gallon wooden barrels in HO scale.
They are connected together with a spru that should be detachable with a sharp knife. To reduce printing cost these are also hollow and the top is printed separately and will require fixing on top of the barrel if a closed barrel is desired.
FUD/FED use a wax type material for supports when printing. To wash off any residue there are various ways. I find that a 2h soak in warm water with some dish soap works well. Dry them carefully afterwards and leave them in the sun for a couple of hours to make sure everything is fully cured.
I tend to apply a primer after this (Tamiya Surface primer seems to do the trick) this is great at showing some of the details as well as small imperfections that can be carefully sanded away.
After that paint as normal. I use acrylic paints and chalk powders and finish with a dull coat.
I am yet to try the acrylite material. I have some on the way to test painting them.
If you notice anything missing on the model or would like to provide suggestions, adjustements etc. please feel free to get in touch.
There is an N scale version available and If there is interest for these in larger scales feel free to get in touch.