>Still workin on it
This servo mount allows you to put the servo in the lowest possible position right above the axle/diff housing. Mounted onto the axle via link mount bolts. (2x M2,5mm x 16mm and 2x 2,5mm x 12mm bolts required)
Also requires RC4WD M3/M4 Rod Ends
with ball wide 6,92mm
This particular "rear" adapter is the choice for a all wheel steer truck where the TRX-4 front axle is used as a rear axle.
Differences compared to the front version:
- it has to be installed like 10 degree laid back (longer upper links) to equalize caster angle.
This fact causes following advantages:
- laid back angle realizes more clearance underneath the rear drive shaft
- the lower link mounts are placed slighty lower to compensate the heightening due to the laid back angle
- added sway bar mount above lower link mount (7mm inner wide)
: This part is meant to find its place in custom built rc trucks. You have to eliminate the third link mount of your axle housing!
. its not gonna fit into the stock TRX-4 truck without changes on the frame and frame supports. Front (steering) axle only. Does not
fit the rear (non-steering) axle.