Click and drag to rotate
1:285 Daimler Benz Project F 3d printed

Not a Photo

White Natural Versatile Plastic
1:285 Daimler Benz Project F 3d printed
1:285 Daimler Benz Project F 3d printed

Not a Photo

1:285 Daimler Benz Project F

Made by
Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The Daimler Benz Project "F" was designed as a piloted missile to be launched from the Daimler Benz Project "C" carrier aircraft. Six of these manned missiles could be carried at one time (see diagram below). The wings and tailplanes were swept back sharply, and power was supplied by a single BMW 018 jet engine. 3000 kg (6600 lbs) of explosives were located in the nose of the aircraft, which were detonated on impact. Once carried aloft by the carrier aircraft, the DB Project "F" aircraft were then released near the target, with the pilot then choosing his target and then diving towards it. When the pilot was assured of a hit, he was to escape by a hatch located beneath the cockpit (see diagram below). Although this aircraft wasn't officially considered a suicide plane, the pilot probably had a very small chance of survival, due to the speed of the aircraft in the attack and the proximity to the target when escaping.
What's in the box:
1:285 Daimler Benz Project F
4.98 x 3.5 x 1.17 cm
Switch to inches
1.96 x 1.38 x 0.46 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.