Do you like to squonk? Well, this is the MOD for you. The V2 Squonker is made up of 3 main parts,
- This body
- One of these covers
- And the V2 Squonker bezel of your choosing
This alows you to build a bottom feeder for all DNA 40/25 chip sets, with any Evolv chargers or even with an SX mini J.
I have uploaded 2 bezels as of now
And can upload any of my 2.x, 3.x, or SX bezels as a bezel for the V2 Squonker you wish apon request.
To build this you will need the following:
- This body
- One of the covers listed above (Honeycomb 2 is my favorite)
- a V2 bezel
Fatdaddys V4 22mm BF Set- LONG http://www.fatdaddyvapes.com/shop.html
Fatdaddys Bottom Feeder Bottle Attachment http://www.fatdaddyvapes.com/shop.html
6ml Bottle (I found them here but others may also work) http://www.ebay.com/itm/6-ml-LDPE-Squeezable-Soft-Plastic-Dropper-Bottles-Lot-of-12-/361023364362?pt=LH_DefaultDomain_0&var=&hash=item540eab5d0a
M1.6 screws. (6- 6mm to attach the bezel to the body and the 4mm to attach the chip/charger to the bezel). I personally use all 6mm screws and use a wire cutter to nip a bit off the ends for the chip. I'll list both sizes though,
I included 6 spots for magnets in my original design, but have never needed to install them. Rather than remove the holes for them (since they are not visible when the cover is colsed) I left them so that IF the cover would ever get loose due to repeated removal, I could easily add them to hold it closed. That said, I have used the original for 6+ month and still not needed to add them.
Those are here should you wish to use them.
Lastly, I used some Gorilla glue to attach the battery ends to the plastic, however any plastic to metal glue would be fine.
*I listed link to where I could easily find parts, The bottle, screws and magnets may be found elsewhere cheaper.
**Rather than flood Shapeways with even more designs, I only uploaded a few of the bezels I have made for this. If you would like to build one, but would like to use another DNA board (40 or 25), 1 amp charger, or the 2.1 bezels round buttons, please email me here or on my facebook http://www.facebook.com/people/Daves-Mod/100008880308514 and I will upload that for you.
I can also add the button/screen lock into the V2 Base and/or make an all in 1 is you know the combination of printed parts you would like to use. I chose not to do this from the start because the number of combinations is unbelievably huge, and instead opted of a piece by piece display with the option of each piece being printed in it's own material and color.
Pictures are posted here https://www.facebook.com/permalink.php?story_fbid=1480874615551868&id=100008880308514
*** I now have a home 3D printer and am able to make these at a fraction of the cost if interested. All parts I print will be fully tested for fit and quality, Please contact me on Facebook for more details.