Click and drag to rotate
Kyosho Ultima Andys style Wishbone 3d printed

Not a Photo

Black Natural Versatile Plastic
Kyosho Ultima Andys style Wishbone  3d printed
Kyosho Ultima Andys style Wishbone  3d printed

Not a Photo

Kyosho Ultima Andys style Wishbone

Made by
Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This set of Lower Wishbones is developed for the Kyosho Ultima re-release buggy to increase the front track width to 246mm. The wishbones are 6mm longer (each) then the original Kyosho , and are a direct fit. For fitting a stabilizer you can use any M3 ball stud.

The design is inspired on the famous Andy’s wishbones. The wishbones will improve handling, especially on high grip tracks. The parts were tested on an astro circuit and works very well. The car has more stability in corners as well as on the straight.

For fitting, some minor adjustments may be required. Two sets were tested. The one printed with MJF fitted without any modification, the set printed with SLS had to be slightly drilled from 2.8 till 3mm and required a bit sanding.

For upper arms, "3RAC-TR355" or equivalent can be used.
What's in the box:
kyosho ultima draagarm
4 x 14.23 x 0.8 cm
Switch to inches
1.58 x 5.6 x 0.32 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.