3d render showing product detail
1/600 French AMX-10P PAC 90 IFV x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$19.96
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/600 Scale Modern French AMX-10P PAC 90 Infantry Fighting Vehicle x10.
Contains 10 highly detailed tanks.
Contains:
AMX-10P PAC 90 Infantry Fighting Vehicle
The AMX-10P is a French amphibious infantry fighting vehicle. It was developed after 1965 to replace the AMX-VCI in service with the mechanized regiments of the French Army; the first prototypes were completed in 1968. Production commenced between 1972 and 1973.
The AMX-10P is fully amphibious, being propelled through water at speeds of up to 7 km/h by twin waterjets. It is also fitted as standard with a trim vane and bilge pumps to assist with the flotation process. AMX-10Ps were popular with a number of Arab armies and have been operated by Iraq, Qatar, Saudi Arabia, and the United Arab Emirates. Special marine variants were also developed for Singapore and Indonesia, including a fire support model known as the AMX-10 PAC 90, which mated the AMX-10P chassis to the complete turret and 90mm gun assembly of the Panhard ERC-90 Sagaie.
AMX-10Ps share a number of common transmission and chassis components with their armoured car counterpart, the AMX-10RC.
The AMX-10P PAC variant has the complete turret and 90mm main gun assembly of the Panhard ERC-90 Sagaie armoured car.[4] It carried 30 90mm shells and 2,000 rounds of 7.62mm machine gun ammunition.[4] This variant was marketed primarily to Indonesia and Singapore.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
- 10x French AMX-10P PAC 90 Infantry Fighting Vehicles
AMX-10P PAC 90 Infantry Fighting Vehicle
The AMX-10P is a French amphibious infantry fighting vehicle. It was developed after 1965 to replace the AMX-VCI in service with the mechanized regiments of the French Army; the first prototypes were completed in 1968. Production commenced between 1972 and 1973.
The AMX-10P is fully amphibious, being propelled through water at speeds of up to 7 km/h by twin waterjets. It is also fitted as standard with a trim vane and bilge pumps to assist with the flotation process. AMX-10Ps were popular with a number of Arab armies and have been operated by Iraq, Qatar, Saudi Arabia, and the United Arab Emirates. Special marine variants were also developed for Singapore and Indonesia, including a fire support model known as the AMX-10 PAC 90, which mated the AMX-10P chassis to the complete turret and 90mm gun assembly of the Panhard ERC-90 Sagaie.
AMX-10Ps share a number of common transmission and chassis components with their armoured car counterpart, the AMX-10RC.
The AMX-10P PAC variant has the complete turret and 90mm main gun assembly of the Panhard ERC-90 Sagaie armoured car.[4] It carried 30 90mm shells and 2,000 rounds of 7.62mm machine gun ammunition.[4] This variant was marketed primarily to Indonesia and Singapore.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
600 AMX-10P PAC 90 X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
