Click and drag to rotate
Rmah (A61), Details (1:200 model) 3d printed parts as they come printed

Not a Photo

parts as they come printed
Rmah (A61), Details (1:200 model) 3d printed parts as they come printed
Rmah (A61), Details (1:200 model) 3d printed parts as they come printed

Not a Photo

Rmah (A61), Details (1:200 model) 3d printed shapeways render
Rmah (A61), Details (1:200 model) 3d printed shapeways render

Not a Photo

Rmah (A61), Details (1:200 model)

3D printed in matte translucent plastic that showcases fine and intricate details.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Parts in "Frosted Detail" material to complete the model of the A61 Rmah in 1:200 scale:
  • dinghy
  • dinghy crane
  • two life rafts
  • life raft mount
  • compass
  • two small radomes
  • large radome
  • main mast
  • two spotlights
  • two radar sensons
  • bow mast
  • two anchor winches
  • two anchors
  • rear ramp (one bottom platform, three top platforms)
  • two rudders
  • two props (for static model, not for RC use)
  • crane main body
  • crane beam
  • crane pulley
  • crane winch
  • lids for front gun mounts
  • lid for aft gun mount
 To complete the model oft he Rmah Auxiliary, the following sets of 3D prints are needed:
If you want to build a static model, all parts are included in the above sets of prints If you want to build the model as a functional radio controlled model, the following parts are available to complete the functions (further parts, e.g. the RC system, are needed):
Furthermore, a display stand is available for A61 Rmah and A62 Alfaq.To complete the boat as an radio controlled model, further components are needed. It requires the advanced skills and experience to complete this. For the drive, the following parts are needed:
  • one 4 gram servo for steering (recommended: ES-07 by Modelcraft)
  • two motors N20 (DC Ø 12mm x 15mm) for main propulsion
  • two shafts of 150mm length (recommended: Graupner 409)
  • two propellers of no more than 13mm diameter (recommended: Prop Shop STD/0550/4/LH/BR and STD/0550/4/RH/BR)
  • coupling hose (recommended: Robbe R 1386)
  • micro motor M700 (7x16mm) for bow thruster
  • worm gear for bow thruster drive (M0,3, worm gear and 18 teeth gear for 1mm shaft, recommended Sol Expert S3 worm wheel and Z18031 gear)
 The auxiliaries A61 Rmah and A62 Alfaq were built as multi-purpose vessels / auxiliaries fort he United Arab Emirates. They are designed as RoRo ships (roll on, roll off), but can also be used as minelayers and for other supply tasks. Some sources on the web also suspect a possible ASW (anti submarine warfare) duty that, however, has not been confirmed. Both were built by Nobiskrug shipyard in Germany in 2013.  The originals are 58m long, 11m wide, and have a draught of 2.4 meters. They are driven by twin screws (four blades each, no kort nozzles) and twin rudders. A bow thruster improves the general maneuverability.  Photos are available online e.g.   The model is designed in 1:200 scale. It is consequently set up to enable radio control functions (RC), both for the two shaft, the rudder and the bow thruster, which is designed to be fully working. Additionally, the radar, the main crane, the RoRo ramp a the stern and lights can be set up to work. However, this model is not set up to be ready to run, but it requires refinement and it only suitable for skilled model builder. For an assembly manual, details and further background information: see (download section)
What's in the box:
Rmah (A61), Details (1:200 model)
shapeways render
8.68 x 3.65 x 3.3 cm
Switch to inches
3.42 x 1.44 x 1.3 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.
Sign In or Join to comment.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.