Click and drag to rotate
Lamps 3d printed

Not a Photo

Smoothest Fine Detail Plastic
Lamps 3d printed
Lamps 3d printed

Not a Photo


Ships as soon as 9 days
3D printed in matte translucent plastic that showcases incredibly fine and intricate details.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description

This is a common lamp that was mounted on switch stands that I built for some fellow C&O modelers.  The model is in HO scale.  The bottom is cored so it can be mounted on a clear plastic rod for illumination.  Trim the lamps from the sprue with flush cutting pliers such as Xuron (it is the top of the lamp that is attached to the sprue) and use some 320 grit sandpaper to toke the sprue remanent down to the top of the lamp, at the small flange.  For someone with real determination (like me) an array of four fiber optic light guides could be installed so the  proper red/green display would be presented for the switch position.  In larger scales this would not be much of a problem.  A more rational approach would be to use a single fiber and just set the whole lamp for red (diverging) or green (straight).

What's in the box:
3.47 x 2.12 x 0.97 cm
Switch to inches
1.37 x 0.84 x 0.38 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.