Click and drag to rotate
Turnout frog 3d printed

Not a Photo

Natural Bronze
Turnout frog 3d printed
Turnout frog 3d printed

Not a Photo

Turnout frog

3D printed in organic bronze resembling rose gold with a rough antique finish.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The most difficult part in hand laying a turnout is to create the frog and the rails near the frog. This part has the frog and the rails close to the frog.

The frog is made for a #8 turnout and code 83 rails. Code 83 means that the rail is 83/1000 inches high.

Please note that this project is experimental. I'm a newbe in creating turnouts.

Important note:

Due to limitations of the production process, I have not been able to have a sharp edge on the frog. You need to rasp the frog to ensure that the frog has a sharp edge. But I don't thick that is a big problem. But you would need a needle file to be able to do it properly.

What's in the box:
Spårkors Sammansatt
6.57 x 0.21 x 1.69 cm
Switch to inches
2.59 x 0.08 x 0.67 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.