3d render showing product detail
1/600 German Grille 15 Tank Destroyer x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.27
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/600 Scale WW2 German Army German Grille 15 Tank Destroyer.
Contains 10 highly detailed tanks.
Contains:
German Grille 15 Tank Destroyer
In the summer of 1942, Waffenamt (the German Army Weapon Agency) concluded an agreement with the Krupp and Rheinmetall companies for designing a tank destroyer on the chassis of the Panther tank. It was planned to mount either the 128-mm K 43 gun or the 150-mm sFH 43 howitzer. The projects were designated Grille 12 and Grille 15, featured rear placement of the fighting compartment, and differed only in the artillery system type. Later, the Grille 15 received a 150-mm gun with a length of 63 calibers, which could penetrate 200 mm of armor at 4,000 meters. However, development was slow, and the Grille 15 remained only in blueprints.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
- 10x German Grille 15 Tank Destroyers
German Grille 15 Tank Destroyer
In the summer of 1942, Waffenamt (the German Army Weapon Agency) concluded an agreement with the Krupp and Rheinmetall companies for designing a tank destroyer on the chassis of the Panther tank. It was planned to mount either the 128-mm K 43 gun or the 150-mm sFH 43 howitzer. The projects were designated Grille 12 and Grille 15, featured rear placement of the fighting compartment, and differed only in the artillery system type. Later, the Grille 15 received a 150-mm gun with a length of 63 calibers, which could penetrate 200 mm of armor at 4,000 meters. However, development was slow, and the Grille 15 remained only in blueprints.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
600 Grille 15 X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
