TLF# - PARENTAL Body - 18650

Fully customizable V3 - PARENTAL of the TLF# Body..... build your own *TINY*LITTLE*F#CKRZ*..... paint it..... grind it..... polish it..... feel free to show the world YOUR personal *TINY*LITTLE*F#CKR*

To complete your own TLF# you only have 4 steps to do :
- we recommend the complete [u]Build-Kit (including all neccessary parts)[/u] provided by Vape & Make
- throw in a 510 connector with 22mm like the new VAPE & MAKE Connector
- choose your prefered "hitting" material (according to the drawing)... either copper or brass or silver or whatever transmits Amps.
- throw in your squonk bottle (our recommendation is the V&M Silicone Bottle or Cappy v4 to get the best Squonk experience)
- small piece of battery strap 10mm wide
- we recommend TAMIYA - PS colours if you want to colour up your *TINY*LITTLE*F#CKR*

..... and you´re ready to #fucknoavailability.....

ATTENTION: PLEASE FOLLOW THIS STEPS TO GET THE EASIEST WAY OF ASSEMBLING !!!
- remove rest of powder in the holes (especially below the bottom of bottle plate and slide for battery strap) !!!
- take care that the button moves easily inside the hole (use a body reamer to widen the hole) !!!
- the same with the 510 Connector... make sure the 510 slips easily into the hole !!!
- Assembling steps... 1) 510 Connector with negative battery plate... 2) clip in the possitive battery plate... 3) put in a battery... 4) apply small piece of adhesive tape to the button 5) lift the battery plate until the button can slip through and install the button... 6) have fun with your TLF#...

[u]*** LIMITED EDITION ONLY AVAILABLE IN OUR FACEBOOK GROUP ***[/u]
Please contact me directly in regards of assembly.....