1/144 Royal Navy 4.7" Ready Use Lockers (Tall) x4
1/144 Royal Navy 4.7" Ready Use Lockers (Tall) x4
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.62
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/144 Scale Royal Navy 4.7" Ready Use Lockers (Tall) x4. These are highly detailed and accurate parts modelled from plans and photographic reference. These Lockers would have been used on most/all Allied Warships that carried the 4.7" QF MKIX and QF MKXII Guns (A through I, O, Q through W, Tribal (1937), J, K, N and Abdiel Classes). These are the Tall Lockers (Approx 6.25ft High full size). See My Shop for the Medium and/or Small versions of the 4.7" ready Use Locker.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- 4x Tall Lockers
- Highly detailed, modelled from plans and photographic reference.
- These parts are printed with Door facing up to minimise wax support for maximum detail.
- Locker is also hollow to minimise cost.
- Details include Hex nuts, 1x Doors with embossed pattern, Hinges, Locking Handles and Locker Stiffeners
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Tags
1:144 Military WWII Britain 1/144 4.7Inch Ammo Locker 1/144 Use Locker 3D Printed Model Parts 4.7 Inch MKIX Ammo Locker 4.7 Inch Ready Use Locker A to I Class Destroyer Abdiel Class G Class Destroyer H Class Destroyer J Class Destroyer K Class Destroyer N Class Destroyer Q through W Class Royal Navy Ammo Locker Tribal ClassDetails
What's in the box:
144 4.7 Inch ready Use Locker Tall x4 Sprue.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
