This is a pair of (quantity of 2) CSW Wall Mounts that provides a convenient and stylish storage method for your CSW wheels.
See this product if you are looking to purchase only one wall mount.
The wall mount is designed to be compatible with various mounting configurations. It is also designed to provide a sturdy support for you wheel while allowing easy low force attachment and removal of the wheel from the wall mount.
The wall mount is designed to be compatible with various mounting configurations. It can be mounted to drywall using drywall anchors. It can be mounted to a wall being screwed directly into a stud. It can be mounted to an aluminum extrusion (80/20), to a wooden panel or any other mounting location that can use two screws or a single 1/4" (6mm) bolt.
Note that the white plastic will show grease from the quick disconnect. This can be seen in the product pictures. It does not damage the product but is less attractive when the wheel is not on the wall mount.
Click here for Installation Instructions
Required Hardware for one wall mount (Not Included)
Drywall mounting: (2) #10 drywall anchors and #10 drywall anchor screws.
Drywall mounting (stud mounting): (2) 2" coarse thread drywall screws.
Aluminum extrusion mounting: (1) 1/4" (6 mm) bolt and washer and t slot nut.
Through hole mounting (wood or metal plate): (1) 1/4" (6 mm) bolt, washer and nut.
IMPORTANT!!!
You must use mounting hardware that does not extend more than 1/2" (12 mm) into the cavity of the wall mount. If the mounting hardware extends more than 1/2" (12 mm) then damage can occur to the pins on the wheel. JEC Enterpises LLC and shapeways is not responsible for damage to your CSW wheel due to improper use of this product.