These uprights are designed to work with the Ampro Omega rear suspension. There are three versions available. If you do not know what version is best for your needs, the 1.5 degree (045017-01) version is the best all around performer.
Please see the video below of the complete installation prior to purchase. This product is always in development and your input is always welcome. Note that significant modification is needed to fit a Grasshopper body.
0 degree (045017-00)
1.5 degree (045017-01)
3 degree (045017-02)
Note that the following is still needed to complete the kit:
AMPRO PARTS
045018-00 Omega Arms, No Sway Bar
045018-01 Omega Arms, Sway Bar
045019-00 Omega Frame
045007-01 Hornet Shock & Wing Mount
045007-02 Hornet Shock & Ampro Wing Mount
(for use with Ampro Wing, display only)
045007-03 Hornet Shock & Heavy Duty Wing Mount
(body may need light modification to fit)
045005-01 AMPro Hornet Battery Tray Retainer
(See episode 1 for installation)
045015-01 Shock Eyelet, 16.75mm
http://shpws.me/Ooq7
ADDITIONAL PARTS NEEDED
Axles- Tamiya DF03RA & TA04
RC Joint Cups, Tamiya Part Number: 9804181
Comes in 2 and 4 pieces, 2 needed
Two 5x8x2.5 Ball Bearings
4x 5X11 Ball Bearings
HARDWARE
2x 20mm M3 Machine Screws
4x 16mm M3 Machine Screws
12x 12mm Long Self Tapping Screw
4x 8mm Long Self Tapping Screw
4x 4.8mm diameter x 10mm long Ball Studs
4x 4.8mm Ball Cups
1x 3mm threaded rod, 100mm long is fine
6x Screw pins, 30mm long at least (longer is better, cut to length
1.6mm diameter, 1000mm Long Piano Wire for sway bar (optional)
16x M3 Washer, 0.5mm thick max
10x M3 Locknuts
4 Tamiya 4mm diameter x 6mm length brass sleeves
2x Tamiya Spring Mount (H4)