NSR 10ton Ballast Brake Van body - 4mm scale
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$24.63
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
North Staffordshire Railway Brake Van conversion for ballast trains, orig built c mid 1870s to early 1900s.
This is an accurate model in 4mm scale, based on details in GF Chadwick (1993) "North Staffordshire Wagons" ISBN 1 874103 15 1, photo of no 60 built in 1874, photo of no 216, and Stoke Works GA drawing dated 1888.
The model shown in the photo is an example printed in FROSTED ULTRA DETAIL (FUD), but is an earlier version with a roof and a separate floor unit.
The builder needs to add a plastic or brass roof, 0.45mm wire for handrails, and suitable door handles. Drill holes at dimples adjacent to the fixing brackets. Lamp irons could be made from FB strip, slots are provided. The floor is designed for MJT 00/EM/S4 W-iron units at 9’ 7” wheelbase. Fit grease or oil axleboxes, springs, brake gear, round base wagon buffers (all not included but mostly available from 51L Models).
Livery: NSR = probably goods brown (suggest use GWR Indian Red). Letters white.
For 3D modelling details see RMweb topic at: http://www.rmweb.co.uk/community/index.php?/topic/64692-nsr-brakevan-in-4mm-scale-by-3d-printing/
Modelling the "Knotty"? see the NSR Study Group at: http://www.nsrsg.org.uk/
NB this model has been test printed in Fine Detail Plastics with excellent results but has not been test printed in Black Hi-Def Acrylate or Multi Jet Fusion Plastic Gray P12.
This is an accurate model in 4mm scale, based on details in GF Chadwick (1993) "North Staffordshire Wagons" ISBN 1 874103 15 1, photo of no 60 built in 1874, photo of no 216, and Stoke Works GA drawing dated 1888.
The model shown in the photo is an example printed in FROSTED ULTRA DETAIL (FUD), but is an earlier version with a roof and a separate floor unit.
The builder needs to add a plastic or brass roof, 0.45mm wire for handrails, and suitable door handles. Drill holes at dimples adjacent to the fixing brackets. Lamp irons could be made from FB strip, slots are provided. The floor is designed for MJT 00/EM/S4 W-iron units at 9’ 7” wheelbase. Fit grease or oil axleboxes, springs, brake gear, round base wagon buffers (all not included but mostly available from 51L Models).
Livery: NSR = probably goods brown (suggest use GWR Indian Red). Letters white.
For 3D modelling details see RMweb topic at: http://www.rmweb.co.uk/community/index.php?/topic/64692-nsr-brakevan-in-4mm-scale-by-3d-printing/
Modelling the "Knotty"? see the NSR Study Group at: http://www.nsrsg.org.uk/
NB this model has been test printed in Fine Detail Plastics with excellent results but has not been test printed in Black Hi-Def Acrylate or Multi Jet Fusion Plastic Gray P12.
Details
What's in the box:
NSR 10ton Ballast Brake Van body - 4mm scale
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
