1/72 Royal Navy Byers Stockless Anchor 40cwt
1/72 Royal Navy Byers Stockless Anchor 40cwt
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.74
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/72 Royal Navy Byers Stockless Anchor 40cwt x1 (Most British Destroyer Classes and similar size vessels). This is a highly detailed and accurate Byers Stockless Anchor based on the Norman Ough plans, size references and photographic reference. Available in other scales and other sizes for most different sized Royal Navy vessels.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- 1x Anchor
- Highly detailed and accurate parts, modelled from plans and photographic reference.
- Set comes in 3 parts: Shank, Crown and Swivel Pin.
- details include: Securing Bolt, Tripping Palms, Webs, Shackles and name of manufacturer (large scales only)
- When assembled the crown will be able to pivot as desired (see renders)
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
72 Byers 40 CWT.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
