Shapeways + COVID-19  
See Solutions

Click and drag to rotate
Catalina 22-TD=17mm, Slot=5.9"x1/2" 3d printed

Not a Photo

White Natural Versatile Plastic
Catalina 22-TD=17mm, Slot=5.9"x1/2" 3d printed
Catalina 22-TD=17mm, Slot=5.9"x1/2" 3d printed

Not a Photo

Catalina 22-TD=17mm, Slot=5.9"x1/2"

3D printed in white nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Order White to save a few dollars or select dyed Black for best UV protection.
IMPORTANT!  Your mast must have a Track depth of 17mm and feed slot of 6" x 5.9".
The insert sleeve is symmetrical, with two protruding nipple pins. 
Center the Insert within the feed slot.  Use the nipple pinhole as a drilling guide for a #55 bit to mark aluminum for a pilot hole.  Remove the insert to finish drilling holes with a 3/16" drill bit and remove any burrs.

Nipple pins will key into the holes to prevent unintentional sliding of the insert.

For free 2-year warranty and support, Please register your purchase:
Name, email, part number ordered, sailboat's year, make & model
I will provide you with a reference number to track your purchase and emails.

rev. C22-TD=17.14mm-x-149mm.PG514B
What's in the box:
1.47 x 8.99 x 13.87 cm
Switch to inches
0.58 x 3.54 x 5.46 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.
Sign In or Join to comment.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.