Cherry Keeper Custom - CKC-EB3HB4-19 with TouchStop
88mm total length, 40x30 tip diameter, 28mm head length, 35x35 shaft diameter. HeadLock 35x25. TouchStop along mid-section and tip.
TouchStop is a mesh that covers several segments of a Cherry Keeper Cage. TouchStop is designed to prevent access to areas of skin within that portion of the cage while still allowing air and water access to the skin beneath.
Please Note: On this custom design, the TouchStop is lined up against the inside of the bars instead of the outside as it typical of other designs.
The Headlock feature adds a smaller ring to the entrance to the cage, restricting the opening in such a fashion as to hold the head in place when properly sized. The Headlock ring will also put an end to casual pull-out attempts if a sufficiently large Headlock size is chosen. No device of this style is 100% secure, but Headlock makes it so that a serious effort must be put in to escape.
Total Length: 88mm
Tip Inside Diameter: 40mm x 30mm
Tip Depth in front of HeadLock: 28mm
HeadLock: 35mm x 25mm
Shaft Inside Diameter: 35mm x 35mm
Bar Profile: Circular - 5 mm dia.
Locking Mechanism: Utilizes a standard chastity lock cylinder (not included)
Ball Gap: (To standard ergonomic rings +/- 0.2mm)
- 36mm ring: 11.6mm
- 38mm ring: 11.8mm
- 40mm ring: 12.3mm
- 42mm ring: 13.0mm
- 44mm ring: 14.1mm
- 46mm ring: 15.3mm
- 48mm ring: 16.8mm
- 50mm ring: 18.5mm
Bullet Vibe: No* (It is very close and can be made to work with a little trimming)
Cage renders and diagrams may be shown with a compatible Cherry Keeper Ring and/or brass lock, which are not included. Rings and locks are sold separately.
This cage is only compatible with Cherry Keeper Rings. It is NOT compatible with New Fun Rings or rings from other devices.