Click and drag to rotate
Tlt-1 Low Profile Axle Truss 3d printed

Not a Photo

White Natural Versatile Plastic
Tlt-1 Low Profile Axle Truss 3d printed
Tlt-1 Low Profile Axle Truss 3d printed

Not a Photo

Tlt-1 Low Profile Axle Truss

Made by
3D printed in white nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Axletruss like mount with servo mount holes and lower profile upper 4 link. Mostly uniformly 7mm thick plate with support for traxxas wide 3mm bore hollow balls and standard traxxas rod ends or axial ends. Requires removal of studs on axle forks then tapping 3mm hole in their place (do this carefully with mount installed as guide) Then other screw holes to be carefully tapped to 3mm. Can use stock tlt-1 self tapping screws if normal tap is not available. Test rig TLT-1 with tekin 10.5t redline, mamba max pro, 2cell lipo, traxxas 1/16th trans in high range with 55t spur 35t pinion. Tested on 1/10th buggy course and not being babied this mount is rock solid!
What's in the box:
Tlt-1 Low Profile Axle Truss
5.74 x 3.77 x 1.73 cm
Switch to inches
2.26 x 1.48 x 0.68 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.