Product Description
This pin/peg was designed specifically for making random conenctions between action figures with 4mm ports (ie, Diaclone, etc.), however it could probably be used anywhere a 4mm hole exists (bookshelves, Ikea furniture, etc.); So I guess I'll leave that up to you!
The total length is about 1cm/10mm and the diameter is 3.9mm (for Small) or 4mm (for Medium). The center ring is 1mm thick, leaving about 4.5mm on either side for making connections in pots. Friction decreasing ridges are included to decrease wear and tear during rotation of the pin in a socket (should you so desire!).
Note: This item consists of only one pin; Also, some sanding or acrylic might be needed to reach a perfect fit depending on the material/size ordered.
The total length is about 1cm/10mm and the diameter is 3.9mm (for Small) or 4mm (for Medium). The center ring is 1mm thick, leaving about 4.5mm on either side for making connections in pots. Friction decreasing ridges are included to decrease wear and tear during rotation of the pin in a socket (should you so desire!).
Note: This item consists of only one pin; Also, some sanding or acrylic might be needed to reach a perfect fit depending on the material/size ordered.
Details
What's in the box:
Final_Pin_4mm_sh_joint v4
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
