You must be logged in and verified to contact the designer.
This is the TMX axle housing created to match our GCM Delta chassis. This is a Coilover spring/shock front axle, left side drop. Hex pin-to-Hex pin spacing is 173mm wide. This axle will require TMX Offroad Axle Cover for assembly. This axle will require TM- internal parts found at GCMRacing.ca and TinyTrucks.com websites, and includes bearings, gears, hardware, etc to assemble the axle completely. Link for Axle internal parts here: http://gcmracing.ca/viewitem.php?productid=381 This axle will require the large holes to be cleaned out with a 3/32 or 2.5mm drill. This axle will require the small holes to be cleaned out with a 1/16 or 1.5mm drill. You may have to clean out the print dust from the main axle tube holes as well. Please use a 13/64 drill to clean out the main tube holes.