Click and drag to rotate
Santana 2023, slot= 21 inch 3d printed

Not a Photo

White Natural Versatile Plastic
Santana 2023, slot= 21 inch 3d printed
Santana 2023, slot= 21 inch 3d printed

Not a Photo

Santana 2023, slot= 21 inch

3D printed in white nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Nylon inserts pop into place because the slot width is narrower than the diameter of the inside channel diameter.

The top 4" section is removable for adding or removing sail slugs and the two longer sections should be glued in place for best stability since they do not need to be removed.

To help prevent the top short piece from sliding out of position, you will need to drill a 3/16" hole for the insert's bottom nipple to drop into.

A 1/16" drill guide hole is provided in the nipple to mark the location.  Then remove the short insert to finish the 3/16" drilling.

With the short pice inserted, you can now glue the longer pieces in place.

You may color dye the white nylon surface Black for best UV protection, but any color dye is better than none for added protection (even a permanent marker pen).

MastGates are custom made for each boat because all feed-slots are hand-cut and extrusions  also vary over time.
6/17/20 Build ref#:  "pg525A TD17.7mm 21 inch.V6"
What's in the box:
pg525A TD17.7mm 21 inch.V6
7.18 x 2.04 x 22.67 cm
Switch to inches
2.83 x 0.8 x 8.92 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.